<p dir="ltr"><br>
Hi all</p>
<p dir="ltr">Thanks for the replies on this topic.</p>
<p dir="ltr">Jamie VK2YCJ:</p>
<p dir="ltr">> And having the Ultimate 3 running on 2m is a great opportunity too -<br>
> especially for WSPR.  Will it do WSPR on 6m as well ?</p>
<p dir="ltr">Yes! I already have the U3 working on 6m! I haven't tested on 2m yet, that's why I said I *hope* it will work on 2m. But 6m is sure, already tested! I hope 4m too, for jurisdictions that have a 4m allocation.</p>
<p dir="ltr">There's a U3 mod that gets it operational on 6m even with the AD9850 DDS. See <a href="http://www.hanssummers.com/ultimate3/ultimate3mod6m.html">http://www.hanssummers.com/ultimate3/ultimate3mod6m.html</a> . But up there, the AD9850 DDS spurs are too nasty. Even with a band pass filter not low pass, I still had spurs 1.5MHz either side of the carrier at only -22dBc and -27dBc down. Not really clean enough. With the Si53531A it's fine. I have some comparisons in a PDF document here <a href="http://www.hanssummers.com/ocxosynth.html">http://www.hanssummers.com/ocxosynth.html</a> . Anyway that minor modification to the DDS module described on the 6m page is worthwhile across the bands, it I proves the spectrum and the power output.</p>
<p dir="ltr">73 Hans G0UPL</p>