<p dir="ltr">The tt3 does beacon when powered on but it doesn't send out a position till GPS is locked. So its just the callsign that beacons when powered on. As soon as the GPS locks its send another packet with position data. </p>

<p dir="ltr">Cheers</p>
<p dir="ltr">Dom<br>
VK2HJ</p>
<div class="gmail_quote">On 04/09/2014 5:30 pm, "Ian Bennett" <<a href="mailto:ibennett@tpg.com.au">ibennett@tpg.com.au</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Putting on my OpenTracker hat, they already do this; all my installations use it. Very handy when<br>
testing.<br>
The opentrackers also "beacon on power on"; still waiting for that feature to be written into the<br>
TinyTrak 4 when in Smart Beaconing mode (18 months and counting).<br>
Another annoying habit of the TT3 is it will transmit on power on without GPS lock (even though it<br>
was programmed not to). I noticed this on a TT3 buried in a radio borrowed from a mate. No feedback<br>
as to when this will be fixed.<br>
Rant over.<br>
<br>
Ian<br>
<br>
On 04/09/14 17:18, Ian wrote:<br>
>> Date: Wed, 3 Sep 2014 21:28:50 +1000<br>
>> From: Richard Murnane <<a href="mailto:richard.murnane@internode.on.net">richard.murnane@internode.on.net</a>><br>
>> To: Australian APRS Users <<a href="mailto:ozaprs@aprs.net.au">ozaprs@aprs.net.au</a>><br>
>> Subject: Re: [OZAPRS] Desert trekking<br>
>> Message-ID: <<a href="mailto:B4B8C132-74A7-4274-B980-17087C8835F4@internode.on.net">B4B8C132-74A7-4274-B980-17087C8835F4@internode.on.net</a>><br>
>> Content-Type: text/plain; charset="windows-1252"<br>
><br>
> ~Snip ~<br>
><br>
>> I've always thought it would be nice to have a ?beacon now? button<br>
>> on the TT3, for those times when you want everyone to know where you<br>
>> are right now. Of course, one can always cycle the power and wait a<br>
>> minute for the GPS to lock again.<br>
><br>
>> 73 Richard VK2SKY<br>
><br>
><br>
> I'm going from memory, but didn't some models of the Tinytrack have a 'PTT In' pin on the DE-9, and you could configure it to send off a beacon after the PTT was released? You could connect a push button to ground and a pullup resistor to that, tweak the settings (possibly under MIC-E?) and see how you go.<br>

><br>
> Regards,<br>
> Ian ZL1VFO<br>
><br>
> _______________________________________________<br>
> OZAPRS mailing list<br>
> <a href="mailto:OZAPRS@aprs.net.au">OZAPRS@aprs.net.au</a><br>
> <a href="http://lists.aprs.net.au/mailman/listinfo/ozaprs" target="_blank">http://lists.aprs.net.au/mailman/listinfo/ozaprs</a><br>
><br>
><br>
_______________________________________________<br>
OZAPRS mailing list<br>
<a href="mailto:OZAPRS@aprs.net.au">OZAPRS@aprs.net.au</a><br>
<a href="http://lists.aprs.net.au/mailman/listinfo/ozaprs" target="_blank">http://lists.aprs.net.au/mailman/listinfo/ozaprs</a><br>
</blockquote></div>