<html>
  <head>
    <meta content="text/html; charset=ISO-8859-1"
      http-equiv="Content-Type">
  </head>
  <body bgcolor="#FFFFFF" text="#000000">
    <div class="moz-cite-prefix">Phil,<br>
      <br>
      Things I would check .....<br>
      1. Is the comport speed set correctly to match the settings in the
      application. e.g. 9600<br>
      2. Is the radio data rate set correctly to 1200bps - DIP switches
      6, 7, 8.<br>
      3. Is the HF/VHF switch in the out position for VHF<br>
      <br>
      Going a little deeper, I'd check the audio into the TNC from the
      radio to see how close the two tones are to being the same level.
      The Exar decoder chip in the MFJ1270B is particularly intolerant
      of the high tone (2200Hz) being lower in level than the low tone
      (1200Hz) and will refuse to decode if the levels are too
      different. The TNCs need about 200mV p2p for reliable decoding.<br>
      <br>
      Have you used a terminal program to try to talk to the TNC. You
      should, at very least, see the TNC message when the TNC is powered
      up. This can confirm comport speed, etc. I don't know what the
      latest terminal program is for Windows (I use Linux) but hunt
      around. If you can talk to the TNC with the terminal program you
      are well placed to conduct various tests as suggested by Gordon
      vk4vp.<br>
      <br>
      I have 8 MFJ1270B TNCs (all bought second hand) that have seen
      service at HF, VHF and UHF and I must say I've never had a reason
      to doubt the tone frequencies on any of them, but ........<br>
      <br>
      Ray vk2tv<br>
      <br>
      <br>
      On 30/12/2012 3:09 PM, Phil Kern wrote:<br>
    </div>
    <blockquote cite="mid:003c01cde643$857ad770$90708650$@kernit.com.au"
      type="cite">
      <meta http-equiv="Content-Type" content="text/html;
        charset=ISO-8859-1">
      <meta name="Generator" content="Microsoft Word 15 (filtered
        medium)">
      <style><!--
/* Font Definitions */
@font-face
        {font-family:"Cambria Math";
        panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
        {font-family:Calibri;
        panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
        {margin:0cm;
        margin-bottom:.0001pt;
        font-size:11.0pt;
        font-family:"Calibri","serif";}
a:link, span.MsoHyperlink
        {mso-style-priority:99;
        color:#0563C1;
        text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
        {mso-style-priority:99;
        color:#954F72;
        text-decoration:underline;}
span.EmailStyle17
        {mso-style-type:personal-compose;
        font-family:"Calibri","serif";
        color:windowtext;}
.MsoChpDefault
        {mso-style-type:export-only;
        font-family:"Calibri","serif";}
@page WordSection1
        {size:612.0pt 792.0pt;
        margin:72.0pt 72.0pt 72.0pt 72.0pt;}
div.WordSection1
        {page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
      <div class="WordSection1">
        <p class="MsoNormal"><span lang="EN-AU">Hi Guys,<o:p></o:p></span></p>
        <p class="MsoNormal"><span lang="EN-AU"><o:p> </o:p></span></p>
        <p class="MsoNormal"><span lang="EN-AU">Recently dusted off an
            old MJF-1270b which I used to use with ‘packet’ many years
            ago.<o:p></o:p></span></p>
        <p class="MsoNormal"><span lang="EN-AU"><o:p> </o:p></span></p>
        <p class="MsoNormal"><span lang="EN-AU">Now trying to configure
            this with UI-View32. I’m unsure about the config within the
            Comms Setup Area.<o:p></o:p></span></p>
        <p class="MsoNormal"><span lang="EN-AU">It appears to be
            connected on the default setting. Just can’t  seem to decode
            anything on the terminal screen.<o:p></o:p></span></p>
        <p class="MsoNormal"><span lang="EN-AU"><o:p> </o:p></span></p>
        <p class="MsoNormal"><span lang="EN-AU">Have followed the Config
            Guides on aprs.net.au Aprs via Internet seems to decode
            correctly.<o:p></o:p></span></p>
        <p class="MsoNormal"><span lang="EN-AU"><o:p> </o:p></span></p>
        <p class="MsoNormal"><span lang="EN-AU">Any help or pointing me
            in the right direction, would be greatly appreciated.<o:p></o:p></span></p>
        <p class="MsoNormal"><span lang="EN-AU"><o:p> </o:p></span></p>
        <p class="MsoNormal"><span lang="EN-AU">Cheers<o:p></o:p></span></p>
        <p class="MsoNormal"><span lang="EN-AU"><o:p> </o:p></span></p>
        <p class="MsoNormal"><span lang="EN-AU">Phil<o:p></o:p></span></p>
        <p class="MsoNormal"><span lang="EN-AU">VK5-ZEY<o:p></o:p></span></p>
      </div>
      <br>
      <fieldset class="mimeAttachmentHeader"></fieldset>
      <br>
      <pre wrap="">_______________________________________________
OZAPRS mailing list
<a class="moz-txt-link-abbreviated" href="mailto:OZAPRS@aprs.net.au">OZAPRS@aprs.net.au</a>
<a class="moz-txt-link-freetext" href="http://lists.aprs.net.au/mailman/listinfo/ozaprs">http://lists.aprs.net.au/mailman/listinfo/ozaprs</a>
</pre>
    </blockquote>
    <br>
  </body>
</html>