Dear all,<br><br>I would like to set up a fill-in digipeater for Sydney Northern Beaches. <br>It seems I have quite a good location. <a href="http://aprs.fi/gated/VK2TMF-1">http://aprs.fi/gated/VK2TMF-1</a><br><br>I have a KPC3 with v8.2 firmware that I have configured as a stand alone APRS digipeater after searching these archives and other web sites.<br>
<br>Below are the settings I have that I know are most likely not correct, as I haven't found a definitive source of information.<br><br>Would someone mind checking these and suggest changes to the recommended settings are for a Sydney fill-in please?<br>
<br>BEACON EVERY 30 min<br>BLT<br>1 EVERY 01:00:00<br>2 EVERY 00:00:00<br>3
EVERY 00:00:00<br>4 EVERY 00:00:00<br>BTEXT 1
!3343.55S/15117.50E#VK2TMF Digi <a href="mailto:malcolm@faed.name" target="_blank">malcolm@faed.name</a> Collaroy, Sydney<br>
CD SOFTWARE<br>DIGIPEAT ON<br>INTFACE TERMINAL<br>LT<br>1
>KPC3 v8.2<br>2<br>3<br>4<br>LTP<br>1 APRS VIA WIDE2-2<br>2 GPS<br>3
GPS<br>4 GPS<br>MONITOR OFF<br>MYCALL VK2TMF-1<br>MYALIAS disabled<br>MYNODE
VK2TMF-7<br>
MYPBBS VK2TMF<br>MYREMOTE VK2TMF-9<br>UNPROTO APRS VIA WIDE2-2<br>UIDIGI
ON WIDE1-1,WIDE2-1<br><br>Thanks for your assistance.<br>Regards,<br>Mal. VK2TMF<br><br><br clear="all"><br>-- <br><br><a href="mailto:malcolm@faed.name">malcolm@faed.name</a><br><br>