<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Thanks Geoff.<br>
<br>
Steve - VK6HV<br>
<br>
<br>
Geoff wrote:
<blockquote cite="mid:010101caaedd$16bed110$443c7330$@org" type="cite">
<pre wrap="">Correct - 1315 UDP was used by APRSd to allow INPUT to the APRS-IS by client
scripts.
This is supported by javAPRSSrvr as well, but ONLY from the localhost
(127.0.0.1), whilst APRSd allowed incoming UDP from anyone on the internet
(bad security practice)
Anyone writing scripts that inject data into the APRS-IS should use TCP
connections to the standard 14580 port.
Geoff VK2XJG
-----Original Message-----
From: <a class="moz-txt-link-abbreviated" href="mailto:ozaprs-bounces@aprs.net.au">ozaprs-bounces@aprs.net.au</a> [<a class="moz-txt-link-freetext" href="mailto:ozaprs-bounces@aprs.net.au">mailto:ozaprs-bounces@aprs.net.au</a>] On
Behalf Of Jim Tittsler
Sent: Monday, February 15, 2010 8:56 AM
To: Australian APRS Users
Subject: Re: [OZAPRS] javAPRSSrvr UDP Port 1315
On 2010-02-15 10:39, Jim Tittsler wrote:
</pre>
<blockquote type="cite">
<pre wrap="">On 2010-02-14 22:32, Steve Page wrote:
</pre>
<blockquote type="cite">
<pre wrap="">What does anyone know about javAPRSSrvr UDP Client Port number 1315?
What is this port used for?
</pre>
</blockquote>
</blockquote>
<pre wrap=""><!---->
Sorry, I clearly misunderstood the direction.
I don't know what that port is used for... but I'd *guess* it is for
scripting since that was the old APRSd scripting port.
Sorry for the noise.
</pre>
</blockquote>
<br>
</body>
</html>