[OZAPRS] Receive only iGates

[Scott Evans]

The only thing I would advise is that if there's sufficient coverage in the area that you are in then you may find that you won't appear to be passing traffic into the APRSIS and there's a small chance that you could receive messages and because you will be RX only the intended recipient will not get the message. However with all that said, who would I be to not encourage experimentation!

Cheers
________________________________
From: OZAPRS <ozaprs-bounces at aprs.net.au> on behalf of Bradley Clayton <bradley at squarepolka.com>
Sent: Tuesday, January 26, 2021 4:59:57 PM
To: ozaprs at aprs.net.au <ozaprs at aprs.net.au>
Subject: [OZAPRS] Receive only iGates

Hi all,

I hope you're well.

I'm experimenting with Direwolf and the configuration for a receive only
i-Gate - RF to Internet only. I wanted to reach out to ask
if there are any concerns or considerations for this configuration? Just
want to make sure this approach doesn't cause loops or any other adverse
affects on the network?

I hope this is an OK place to ask, and thanks in advance.

Cheers,
Bradley
VK3LIT

--
Bradley Clayton
bradley at squarepolka.com
https://bradleyclayton.com
https://keybase.io/bradleyclayton
-

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20210126/9fec7153/attachment.htm>