[OZAPRS] VK1RGI-1 config changes

glenlist glenlist at cortexrf.com.au
Mon Jan 13 07:25:31 AEDT 2020


Hi Graeme

yes. and I am also.

its because the of the way dire wolf is handling  CDIGI packets also.  
The bushfire warning packets are specifically targetted at VK2RGI so 
they DO NOT go out on any other network.

For CDIGIPEAT, from my reading, I needed to put the callsign into a 
filter . but for UI digi , using a specific repeater, we end up with 
dupluicate chains

I have put a new version of DW on over the weelend, but  it didnt 
change, I will have another look at it when I have time

It's not too much of a big deal. in fact bushwire warning packets sent 
twicre might be a reliability improver.

cheers


On 13/01/2020 07:04, Graeme wrote:
> Presumably VK1MIC isn't aware that all the fire warning messages are 
> being sent in duplicate and on quite short refresh intervals too.
>
> Digipeater VK1RGI-1 audio level = 40(17/17)   [NONE]   _||_:____
> [0.2] 
> VK1MIC-1>APDW15,VK1RGI-1*:}SCTBFA>APRS,TCPIP,VK1MIC-1*:;SCTBFA82A*122243z3532.42S/14934.57E: 
> }i05J'M2JFUS^mmu{CJhAA
> Third Party Header, Ambulance, DireWolf, WB2OSZ
>
> Digipeater VK1RGI-1 audio level = 39(14/15)   [NONE]   _||______
> [0.1] 
> VK1MIC-1>APDW15,VK1RGI-1*:}SCTBFA>APRS,TCPIP,VK1MIC-1*:;SCTBFA82A*122243z3532.42S/14934.57E: 
> }i05J'M2JFUS^mmu{CJhAA
> Third Party Header, Ambulance, DireWolf, WB2OSZ
>
> Graeme
> VK2HFG
>
> -----Original Message----- From: glenlist
> Sent: Friday, January 10, 2020 6:41 PM
> To: ozaprs at aprs.net.au
> Subject: Re: [OZAPRS] VK1RGI-1 config changes
>
> Hey, NSW Riverina, (is it) quiet out there these days with reformed
> configuration in VK1RGI-1 ?
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs


More information about the OZAPRS mailing list