[OZAPRS] VK1RGI

Wade Smith wade.vk1 at gmail.com
Fri Nov 8 21:36:23 AEDT 2019


Have reported to the VK1 committee. Interesting I go from 60-80 stations on
average per 30 mins with RGI on and without it I’m down to 20.

On Thu, 7 Nov 2019 at 17:56, Graeme <graeme at abrona.com.au> wrote:

> I’ve since spotted that VK1RGI last heard a station just before mid-night
> last night.
>
> Graeme 2HFG
>
> *From:* Graeme
> *Sent:* Thursday, November 7, 2019 3:29 PM
> *To:* ozaprs at aprs.net.au
> *Subject:* [OZAPRS] VK1RGI
>
> My Igate today is only decoding VK1RGI’s own position reports and hears
> lots of messages that can’t be decoded.  I’ve tried 3 different SDRs with
> all the same effect and I’ve inspected the antenna and cable.  Hence II’m
> wondering if VK1RGI isn’t processing messages properly.  My igate hears my
> vehicle’s beacons but that’s only over 300 metres or so.
>
> I can’t spot any current forwarding by VK1RGI yet there’s normally quite
> some traffic around Canberra.  Can someone confirm that VK1RGI is or is not
> operating properly?
>
> Thanks,
> Graeme
> VK2HFG
>
> ------------------------------
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
-- 
-
VK1MIC.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20191108/83ed10bb/attachment.html>


More information about the OZAPRS mailing list