[OZAPRS] IO board project giithub update
Glen English VK1XX
glenlist at pacificmedia.com.au
Mon Mar 5 17:14:04 AEDT 2018
Not powered through connector, but since all the pins are there , you
can jumper the switched 5V on there. the board is designed to be
jumpered up by the user... Otherwise too hard to be all things to all
people.
Couldnt really spend any more time on it so I made it a 4 layer. spent
about a full working week all up I think.
The idea is that the board sits on the screwsand you use a short PCB
fixed or 40way ribbon IDC jumpered to the board... this way the boardÂ
sits upright, not upsidedown. But... you *could* put the board up
underneath the board....
I have put the composite PCB layer prints at :
https://github.com/glenenglishgithub/CRF18-1/blob/master/Job1.PDF
On 5/03/2018 4:16 PM, Mark Jessop wrote:
> Ahh thatd do it! I can't open the altium files here at work...
>
> - Mark
>
> On 5 Mar. 2018 15:41, "Matthew Cook" <vk5zm at bistre.net
> <mailto:vk5zm at bistre.net>> wrote:
>
> Powered through the 40 way connector is what I'd assume, previous
> images did not include planes.
>
> /M.
>
> On 5 March 2018 at 15:38, Mark Jessop <lenniethelemming at gmail.com
> <mailto:lenniethelemming at gmail.com>> wrote:
>
> Too late I guess, but I don't see how it will be possible to
> power a raspberry pi with that board. The power connector is a
> micro USB on the opposite edge of the board from the 40-way
> header. In the PCB config shown the box will get in the way.
>
> - Mark VK5QI
>
> On 5 Mar. 2018 15:33, "Glen English VK1XX"
> <glenlist at pacificmedia.com.au
> <mailto:glenlist at pacificmedia.com.au>> wrote:
>
> Gone to fab.....
>
> GIT updated.
>
>
> On 5/03/2018 1:34 PM, Glen English VK1XX wrote:
>
> 100% routed.
>
> off to fab afer the compulsory 24 hour wait....
>
> I will update github.
>
>
>
>
> On 1/03/2018 11:50 AM, Glen English VK1XX wrote:
>
> Board is now substantially routed and continues to
> shrink.
>
> any last requests.....?
>
>
>
> On 21/02/2018 4:43 PM, Glen English VK1XX wrote:
>
> https://github.com/glenenglishgithub/CRF18-1
> <https://github.com/glenenglishgithub/CRF18-1>
>
> see main.pdf if u dont have Altium...
>
>
>
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au <mailto:OZAPRS at aprs.net.au>
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> <http://lists.aprs.net.au/mailman/listinfo/ozaprs>
>
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au <mailto:OZAPRS at aprs.net.au>
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> <http://lists.aprs.net.au/mailman/listinfo/ozaprs>
>
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au <mailto:OZAPRS at aprs.net.au>
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> <http://lists.aprs.net.au/mailman/listinfo/ozaprs>
>
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au <mailto:OZAPRS at aprs.net.au>
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> <http://lists.aprs.net.au/mailman/listinfo/ozaprs>
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au <mailto:OZAPRS at aprs.net.au>
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> <http://lists.aprs.net.au/mailman/listinfo/ozaprs>
>
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au <mailto:OZAPRS at aprs.net.au>
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> <http://lists.aprs.net.au/mailman/listinfo/ozaprs>
>
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
More information about the OZAPRS
mailing list