[OZAPRS] IO board project giithub update

[Mark Jessop]

Too late I guess, but I don't see how it will be possible to power a
raspberry pi with that board. The power connector is a micro USB on the
opposite edge of the board from the 40-way header. In the PCB config shown
the box will get in the way.

- Mark VK5QI

On 5 Mar. 2018 15:33, "Glen English VK1XX" <glenlist at pacificmedia.com.au>
wrote:

> Gone to fab.....
>
> GIT updated.
>
>
> On 5/03/2018 1:34 PM, Glen English VK1XX wrote:
>
>> 100% routed.
>>
>> off to fab afer the compulsory 24 hour wait....
>>
>> I will update github.
>>
>>
>>
>>
>> On 1/03/2018 11:50 AM, Glen English VK1XX wrote:
>>
>>> Board is now substantially routed and continues to shrink.
>>>
>>> any last requests.....?
>>>
>>>
>>>
>>> On 21/02/2018 4:43 PM, Glen English VK1XX wrote:
>>>
>>>> https://github.com/glenenglishgithub/CRF18-1
>>>>
>>>> see main.pdf if u dont have Altium...
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> OZAPRS mailing list
>>>> OZAPRS at aprs.net.au
>>>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>>>
>>>
>>>
>>> _______________________________________________
>>> OZAPRS mailing list
>>> OZAPRS at aprs.net.au
>>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>>
>>
>>
>> _______________________________________________
>> OZAPRS mailing list
>> OZAPRS at aprs.net.au
>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20180305/225a64e2/attachment.html>