[OZAPRS] tncs

[vk2tv]

I still have mine, too, but parallel ports are a bit scarce these days. 
I also have a 9k6 modem with my Baycom USCC>4 card but ISA ports for it 
are even scarcer!

The YAM probably had a respectable future until Nico (the Italian 
designer) fell off the face of the earth. At least the Linux support 
continues.

Ray vk2tv


On 12/10/17 16:47, Matthew Cook wrote:
> I think I've still got a few of these hanging around from the ol' days...
>
> http://www.qsl.net/gb7dip/kits/yam.html
>
> They were the only cost effective 9600bps demodulators around in those 
> days...
>
> 73
>
> Matthew
> VK5ZM
>
> On 12 October 2017 at 14:45, Glen English VK1XX 
> <glenlist at pacificmedia.com.au <mailto:glenlist at pacificmedia.com.au>> 
> wrote:
>
>     talking of TNCs
>
>     I will be producing an old style standalone TNC by end of year..
>     mainly
>     because I cant buy something descent...
>
>     serial+bluetooth. all open, STM32F
>
>     mainly for WICEN stuff but I think I can run a  few more PCBs in the
>     line. orientated for connected mode work.
>
>     mostly dire-wolf firmware/modem in it ...
>
>     _______________________________________________
>     OZAPRS mailing list
>     OZAPRS at aprs.net.au <mailto:OZAPRS at aprs.net.au>
>     http://lists.aprs.net.au/mailman/listinfo/ozaprs
>     <http://lists.aprs.net.au/mailman/listinfo/ozaprs>
>
>
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20171012/9959be6b/attachment.html>