[OZAPRS] How to make a raspberry pi satgate for the ISS

[vk4tec at tech-software.net]

I am quickly finding out

That there are people who don’t do much who are sitting in the dark ready to throw insults at something quite brilliant

If you have nothing constructive shut up 

-----Original Message-----
From: OZAPRS [mailto:ozaprs-bounces at aprs.net.au] On Behalf Of Glen English VK1XX
Sent: Sunday, 19 November 2017 1:08 PM
To: ozaprs at aprs.net.au
Subject: Re: [OZAPRS] How to make a raspberry pi satgate for the ISS

Andrew , you underestimate the company you are in.


On 19/11/2017 1:00 PM, vk4tec at tech-software.net wrote:
>
> Rick
>
>  
>
> I am Australia’s leading RADAR engineer
>
>  
>
> *From:*OZAPRS [mailto:ozaprs-bounces at aprs.net.au] *On Behalf Of *Rick 
> Kowalewski
> *Sent:* Sunday, 19 November 2017 11:57 AM
> *To:* Australian APRS Users <ozaprs at aprs.net.au>
> *Subject:* Re: [OZAPRS] How to make a raspberry pi satgate for the ISS
>
>  
>
> Very true.
> Mark is a brilliant engineer.  A very, very smart man.
>
> 73,
> Rick VK6RK
>
>  
>
> On 19/11/2017 09:43, Jack Chomley wrote:
>
>     I would take everything onboard that Mark has said, will save you
>     lots of grief AND time ;-)
>
>      
>
>     73,
>
>      
>
>     Jack VK4JRC
>
>
>
>
>     On 19 Nov 2017, at 11:30, <vk4tec at tech-software.net
>     <mailto:vk4tec at tech-software.net>> <vk4tec at tech-software.net
>     <mailto:vk4tec at tech-software.net>> wrote:
>
>         Mark
>
>          
>
>         Its good that stuff breaks that’s how you learn
>
>          
>
>         A
>
>          
>
>         *From:*OZAPRS [mailto:ozaprs-bounces at aprs.net.au] *On Behalf
>         Of *Mark Jessop
>         *Sent:* Sunday, 19 November 2017 11:26 AM
>         *To:* Australian APRS Users <ozaprs at aprs.net.au
>         <mailto:ozaprs at aprs.net.au>>
>         *Subject:* Re: [OZAPRS] How to make a raspberry pi satgate for
>         the ISS
>
>          
>
>         How about you just fix it, then *test* it thoroughly (i.e. on
>         a fresh raspbian install), *then* release it, instead of
>         releasing a half broken script.
>
>          
>
>         Or, as i've mentioned before, just link to the existing
>         Direwolf SDR+APRS guide, which covers off setting up an igate
>         pretty
>         well: 
> https://github.com/wb2osz/direwolf/blob/master/doc/Raspberry-Pi-SDR-IG
> ate.pdf
>
>          
>
>         Also:
>
>          
>
>         pi at satnogs:~ $ cd /
>
>         pi at satnogs:/ $ sudo mkdir satgate
>
>         pi at satnogs:/ $ cd satgate/
>
>         pi at satnogs:/satgate $ git clone
>         https://github.com/niofis/rtl-sdr.git
>
>         fatal: could not create work tree dir 'rtl-sdr': Permission 
> denied
>
>          
>
>          
>
>         - QI
>
>  
>
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs


_______________________________________________
OZAPRS mailing list
OZAPRS at aprs.net.au
http://lists.aprs.net.au/mailman/listinfo/ozaprs