[OZAPRS] RGI/RBM/Griffith digis

[Glen English VK1XX]

Josh, I think the RF message forwarding could be done. That would
provide a reasonable utility for the region.

Yeah will seek to add another transceiver channel up there, which is
actually non trivial but on the list. Maybe 7575, UHF or 6m dunno.

Make the most of the super site.

g


On 1/11/2017 5:42 PM, Josh wrote:
> I can't see a good reason to put an igate there, unless you were
> thinking of dropping the digipeater function altogether.
> There's multiple igates with reliable and fast internet links within
> RGI's footprint, so leave it to them rather than wasting your limited
> bandwidth.
>
> But if you have the link available, setting up APRS-IS->RF message
> forwarding could be a great service addition considering the range and
> general area that RGI covers.
> Bandwidth requirements would be extremely low too.
>
> - Josh VK2HFF
>
> On 1/11/2017 4:43 PM, Glen English VK1XX wrote:
>
>> The Ginini  IP access, at least in the short term is a low bandwidth ~
>> half duplex 50 kbps UHF IP bridge. good for SSH, remote control of
>> things. How many bytes (UDP payload) is the IGATE "upload"
>>
>> ?
>>
>> given the APRS UI "pollution" of 5175 , we'll probably put a second
>> channel on the direwolf and run different freq for connected mode stuff
>> for WICEN...
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs