[OZAPRS] Need a hand - mobile antenna

[Bob VK6KW]

Hi Folks,

One day I’ll actually get to ‘play radios’ again and be able to join you on air; but in the meantime have to console myself with reading the mail and storing up the good ideas; however in earlier times as Net control for the 14.116 Traveller’s Net, and even travelling o’seas (VK7 & ZL) I found the centre loaded Hustler system to work well on my 80 Series (bull bar) and borrowed/hire cars (tow bar). Simple, convenient, effective – and no I don’t own any shares.

Main components are HD spring loaded base, a common folding articulated ‘mast’ section  (1/4 wave on 6m) onto which fits coil loaded ‘resonator’ for whichever band – available for 80m – 10m including WARC.

My subjective observations were that it out performed the Codan 9350+ 1.8m SS whip on any given band.  

 

I presume they are still available – have not had to look as I have several sets including the suitcase-ready one. Just don’t try taking it onto a cruise liner or they will lock it in the hold!!! Rotten spoil sports!

73,

Bob VK6KW

 

From: OZAPRS [mailto:ozaprs-bounces at aprs.net.au] On Behalf Of vk2tv
Sent: Saturday, December 09, 2017 5:08 AM
To: ozaprs at aprs.net.au
Subject: Re: [OZAPRS] Need a hand

 

The more I look at the vehicle, the more I read and the more I hear, the less I want to install something I'll hardly use!

I did consider a nudge bar but not at $800.

I'll build up a tilt-over mast for at home and populate it before I spend too much time on the X-Trail.

Ray vk2tv

 

On 08/12/17 20:40, Liz wrote:

QTR Mon, 4 Dec 2017 09:19:27 +1100 vk2tv QTC
 

I've just looked at my X-Trail and I think I've lost any enthusiasm I 
had for installing radios, hi. I think the engine block was poured in
situ!
 
The main frame of the vehicle - subframe, floor pan, roof, firewall
and door frames - seems to be a welded mass of metal to which
mudguards, bonnet, doors, etc are bolted, so any bolts attaching
components to the sub-frame could be a possibility. A "Z" bracket
coming out from under the bonnet could possibly utilise one of the
mudguard mounting bolts. A magbase on the edge of the bonnet could be
earthed via a short lead to a mudguard mount or the bonnet hinge
mount. Most bonnets are not purposely earthed so heavy(ish) straps
(RG213 braid, e.g.) around the hinges could be beneficial. A couple
of possibilities there, but this is just one specific vehicle.
 
My days of crawling over and under vehicles to install radios ended a 
long time ago; these days I'm the wrong shape for crawling under, and 
multi-focal spectacles don't work well upside down under a dash.
 
Ray
 
vk2tv

 
I've got a 32 series Xtrail.
You forgot to mention the 8cm of insulating foam as well....
My OM took out the passenger seat and got a base plate fitted to the
base of the seat, on which the radios sit, with one head on the dash
and the other on a stalk attached to the passenger seat bolt.
Antenna for 2m is in the middle of the roof and HF antenna on the
bullbar. As indicated previously, motorising the antenna support cost
about $45K.
 
 
 
-+-+-+-+-+-+-+-+-+-+-+
Liz
VK2XSE
_______________________________________________
OZAPRS mailing list
OZAPRS at aprs.net.au
http://lists.aprs.net.au/mailman/listinfo/ozaprs

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20171209/d643cad6/attachment.html>