[OZAPRS] perl IGATE

Tue Aug 29 06:30:42 AEST 2017

It would be St Peter at the Perl iGate. 

Malcolm Larkin
...- -.- ..--- --- - .- 

> On 28 Aug 2017, at 15:25, Andrew Rich <vk4tec at tech-software.net> wrote:
> 
> Huh ? 
> 
> Sent from my iPhone
> 
>> On 28 Aug 2017, at 2:45 pm, Shaun <vk2xpp at optusnet.com.au> wrote:
>> 
>> I'll have a look when I get home, too hard on the phone, but I don't suppose he has a Pi acting as a tracker?  Ie. Pi, USB GPS and USB sound card to deliver the packet tones to the transmitter?  Ideally to work on HF?
>> 
>> Shaun
>> VK2XPP
>> 
>> Brief reply only from my iPhone
>> 
>>> On 24 Aug 2017, at 23:13, Justin Albury <justin at jacomms.com> wrote:
>>> 
>>> APRX works really well.
>>>  
>>> If you run the latest revision that Owen VK2OD rewrote, it is bug free …..check his page
>>>  
>>> http://owenduffy.net/blog/
>>>  
>>>  
>>> Justin Albury
>>> J Albury Communications
>>> justin at jacomms.com
>>> 0417246791
>>>  
>>> -----------------------------------------------------------------
>>> This email, and any attachments are for the use of the intended
>>> recipient(s) and may contain confidential/privileged information.
>>> If you have received this email in error, please notify the sender
>>> immediately and then delete it. If you are not the intended recipient,
>>> you must not copy, disclose or distribute its contents to any other
>>> person. We do not accept any liability in connection with transmitting,
>>> unauthorised access to, or viruses in this email and its attachments.
>>> This notice should not be removed.
>>> ----------------------------------------------------------------------------------
>>>  
>>> From: OZAPRS [mailto:ozaprs-bounces at aprs.net.au] On Behalf Of Mark Jessop
>>> Sent: Monday, 21 August 2017 1:11 PM
>>> To: Australian APRS Users <ozaprs at aprs.net.au>
>>> Subject: Re: [OZAPRS] perl IGATE
>>>  
>>> Apart from UI-View being ancient and un-supported (Mandating deletion of all the source code in your will? WTF?!?!!), using existing, well-tested software is always a better option. 
>>>  
>>> Go look at more modern alternatives to UI-View, please. There are many out there. I'm a fan of YAAC [1] , which is cross-platform and gets regular updates. It'll even run on a Rasbperry Pi.
>>>  
>>> - Mark VK5QI
>>>  
>>> [1] http://www.ka2ddo.org/ka2ddo/YAAC.html
>>>  
>>>  
>>>  
>>> On Mon, Aug 21, 2017 at 12:33 PM, Andrew Rich <vk4tec at tech-software.net> wrote:
>>> Went back to ui-view and aprx
>>> 
>>> Sent from my iPhone
>>> 
>>> On 21 Aug 2017, at 12:09 pm, Mark Jessop <lenniethelemming at gmail.com> wrote:
>>> 
>>> That is not how an igate is supposed to work. What you are doing there is generating packets from your own callsign, with the off-air data as the packet contents.
>>>  
>>> An igate is just meant to add qAR,CALLSIGN onto the end of the path, and pass the packet onto aprs-IS. Go look at the raw data for just about any mobile station on aprs.fi for an example, and go read the 
>>>  
>>> You also appear to have asked this question before on the TAPR mailing list in 2013. The response in that thread was 'why reinvent the wheel'. 
>>> It appears to be surprisingly hard to do igating right, and as a result many igates mangle packets in numerous interesting ways. The author of aprs.fi has written a post on the common problems here: https://github.com/hessu/aprsc/blob/master/doc/IGATE-HINTS.md
>>>  
>>> - Mark VK5QI
>>>  
>>> On Aug 21, 2017 11:16 AM, "Andrew Rich" <vk4tec at tech-software.net> wrote:
>>> Hello
>>>  
>>> I am making a little raspberry pi gate using perl 
>>>  
>>> What am I doing wrong here ?
>>>  
>>> 2017-08-21 11:39:38 AEST: VK4TEC-11>APPERL,TCPIP*,qAC,THIRD:VK2UWP-9>RW07T7,VK4RMC-3,WIDE1*,WIDE2-2/1:`PV^l IR/]"4#}= [Unsupported packet format]
>>> 2017-08-21 11:39:40 AEST: VK4TEC-11>APPERL,TCPIP*,qAC,THIRD:VK2UWP-9>RW07T7,VK4RMC-3,WIDE1*,WIDE2-1/1:`PV^l IR/]"4#}= [Unsupported packet format]
>>> 2017-08-21 11:39:42 AEST: VK4TEC-11>APPERL,TCPIP*,qAC,THIRD:VK2UWP-9>RW07T7,VK4RMC-3,WIDE1,VK4RAI-3*,WIDE2-1/1:`PV^l IR/]"4#}= [Unsupported packet format]
>>> 2017-08-21 11:39:43 AEST: VK4TEC-11>APPERL,TCPIP*,qAC,THIRD:VK2UWP-9>RW07T7,VK4RMC-3,WIDE1,VK4RAI-3,VK4GME-3,WIDE2*/1:`PV^l IR/]"4#}= [Unsupported packet format]
>>> 2017-08-21 11:39:55 AEST: VK4TEC-11>APPERL,TCPIP*,qAC,THIRD:VK2UWP-9>RW07T8,VK4RMC-3,WIDE1*,WIDE2-2/1:`PV^lTAR/]"4#}= [Unsupported packet format]
>>> 2017-08-21 11:39:56 AEST: VK4TEC-11>APPERL,TCPIP*,qAC,THIRD:VK2UWP-9>RW07T8,VK4RMC-3,WIDE1*,WIDE2-1/1:`PV^lTAR/]"4#}= [Unsupported packet format]
>>> 2017-08-21 11:39:58 AEST: VK4TEC-11>APPERL,TCPIP*,qAC,THIRD:VK2UWP-9>RW07T8,VK4RMC-3,WIDE1,VK4RAI-3*,WIDE2-1/1:`PV^lTAR/]"4#}= [Unsupported packet format]
>>> 2017-08-21 11:42:14 AEST: VK4TEC-11>APPERL,TCPIP*,qAC,EIGHTH:VK4RBR-3>APNU19,WIDE2-2/1:>Mt Gravatt Institute of TAFE  Ui-Digi  v19b3 [Unsupported packet format]
>>> 2017-08-21 11:42:14 AEST: VK4TEC-11>APPERL,TCPIP*,qAC,EIGHTH:VK4RBR-3>APNU19,VK4RMC-3*,WIDE2-1/1:>Mt Gravatt Institute of TAFE  Ui-Digi  v19b3 [Unsupported packet format]
>>> 2017-08-21 11:42:14 AEST: VK4TEC-11>APPERL,TCPIP*,qAC,EIGHTH:VK4RBR-3>APNU19,VK4RAI-3*,WIDE2-1/1:>Mt Gravatt Institute of TAFE  Ui-Digi  v19b3 [Unsupported packet format]
>>> 2017-08-21 11:42:14 AEST: VK4TEC-11>APPERL,TCPIP*,qAC,EIGHTH:VK2UWP-9>RW09P8,VK4RMC-3,WIDE1*,WIDE2-2/1:`PV` qqR/]"4$}= [Unsupported packet format]
>>> 2017-08-21 11:42:14 AEST: VK4TEC-11>APPERL,TCPIP*,qAC,EIGHTH:VK2UWP-9>RW09P8,VK4RMC-3,WIDE1*,WIDE2-1/1:`PV` qqR/]"4$}= [Unsupported packet format]
>>> 2017-08-21 11:42:18 AEST: VK4TEC-11>APPERL,TCPIP*,qAC,EIGHTH:VK4RAI-3>APMI04,WIDE2-2/1:>Club Net 2200 Zulu 146.900 & 438.375 & 439.300 91.5Hz Input [Unsupported packet format]
>>> 2017-08-21 11:42:20 AEST: VK4TEC-11>APPERL,TCPIP*,qAC,EIGHTH:VK4RAI-3>APMI04,WIDE2-1/1:>Club Net 2200 Zulu 146.900 & 438.375 & 439.300 91.5Hz Input [Unsupported packet format]
>>> 2017-08-21 11:42:22 AEST: VK4TEC-11>APPERL,TCPIP*,qAC,EIGHTH:VK4RAI-3>APMI04,VK4RMC-3*,WIDE2-1/1:>Club Net 2200 Zulu 146.900 & 438.375 & 439.300 91.5Hz Input [Unsupported packet format]
>>> 2017-08-21 11:42:36 AEST: VK4TEC-11>APPERL,TCPIP*,qAC,EIGHTH:VK4ZF-9>RW32S7,VK4RMC-3,WIDE1*/1:`Q(<0x1e>l!yR/`"4=}davhop at bigpond.net.au_% [Unsupported packet format]
>>> 2017-08-21 11:42:44 AEST: VK4TEC-11>APPERL,TCPIP*,qAC,EIGHTH:VK2UWP-9>RW09U2,VK4RMC-3,WIDE1*,WIDE2-2/1:`PVa S`R/]"4&}= [Unsupported packet format]
>>> 2017-08-21 11:42:45 AEST: VK4TEC-11>APPERL,TCPIP*,qAC,EIGHTH:VK2RPL-3>APNU3B,WIDE2*/1:!2832.56S/15317.41E#PHG5530/SARC 146.800 123H 438.675 123H IRLP6220 [Location changes too fast (adaptive limit)]
>>> 2017-08-21 11:42:45 AEST: VK4TEC-11>APPERL,TCPIP*,qAC,EIGHTH:VK2UWP-9>RW09U2,VK4RMC-3,WIDE1*,WIDE2-1/1:`PVa S`R/]"4&}= [Unsupported packet format]
>>> 2017-08-21 11:42:47 AEST: VK4TEC-11>APPERL,TCPIP*,qAC,EIGHTH:VK2UWP-9>RW09U2,VK4RMC-3,WIDE1,VK4RAI-3*,WIDE2-1/1:`PVa S`R/]"4&}= [Unsupported packet format]
>>> 
>>> _______________________________________________
>>> OZAPRS mailing list
>>> OZAPRS at aprs.net.au
>>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>> 
>>> _______________________________________________
>>> OZAPRS mailing list
>>> OZAPRS at aprs.net.au
>>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>> 
>>> _______________________________________________
>>> OZAPRS mailing list
>>> OZAPRS at aprs.net.au
>>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>> 
>>>  
>>> _______________________________________________
>>> OZAPRS mailing list
>>> OZAPRS at aprs.net.au
>>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>> _______________________________________________
>> OZAPRS mailing list
>> OZAPRS at aprs.net.au
>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20170829/6979277f/attachment-0001.html>