[OZAPRS] TCP / IP over radio

[Matthew Cook]

Andrew,

Yes you'll need the TNC in KISS mode to pass TCP/IP frames over the AX25
stack. There are lots of utilities to help you get the TNC into KISS.

73

Matthew
VK5ZM

On 6 September 2016 at 11:18, Andrew Rich <vk4tec at tech-software.net> wrote:

> Thanks Matthew
>
> Does it have to be KISS ?
>
> Andrew
>
>
> ------------------------------------------
> Andrew Rich
> vk4tec at tech-software.net
> VK4TEC
> 0419738223
>
>
>
> On 6 Sep 2016, at 11:40 AM, Matthew Cook <vk5zm at bistre.net> wrote:
>
> Andrew,
>
> Enable the AX25 stack on your rPi and connect to TNC.
>
> You'll need to do some reading and google will be your friend (
> http://www.tldp.org/HOWTO/AX25-HOWTO/x1194.html).
>
> It works now as well as it did in the day.
>
> 73
>
> Matthew
> VK5ZM
>
> On 6 September 2016 at 10:49, Andrew Rich <vk4tec at tech-software.net>
> wrote:
>
>> Hello
>>
>> I have a TNC and also a 433 MHz radio link I would like to try TCP/IP over
>>
>> Does anyone remember how to do this ?
>>
>> LINUX on Raspberry PI
>>
>> Andrew
>>
>>
>> ------------------------------------------
>> Andrew Rich
>> vk4tec at tech-software.net
>> VK4TEC
>> 0419738223
>>
>>
>>
>>
>> _______________________________________________
>> OZAPRS mailing list
>> OZAPRS at aprs.net.au
>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>
>>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20160906/60aed6b1/attachment.html>