[OZAPRS] HF net stations

[Andrew Rich]

Been a long time dream that HF stations send some sort of identifying letters like (HF)

-----------------------------
Sent from my iPhone
Andrew Rich
vk4tec at tech-software.net
www.tech-software.net
0419 738 223

> On 30 Jun 2016, at 19:57, Tim Logan <timlog77 at gmail.com> wrote:
> 
> Goodo. Thanks guys.  I got a beacon into you this arvo Gerard from up Coffs way. 
> 
>> On 30 Jun 2016, at 6:13 PM, Scott Evans <vk7hse at gmail.com> wrote:
>> 
>> Oops 😆
>> 
>> Silly me was sitting on 7.048.110 LSB (dial)  when I should be up one kHz...  Now fixed!
>> 
>> I was wondering why I hadn't heard anyone!
>> 
>> 
>>> On Thu, 30 Jun 2016, 17:46 Gerard Hill <gerardvk2io at gmail.com> wrote:
>>> Hi Tim (VK2HLT),
>>> I've been receiving your beacons for a few days but they have not reached the APRS-IS. This turned out to be a configuration issue (and possible bug) with BPQ32. Gating is now working, but my APRS beacons are not going out so more changes are needed. Other beacons are being sent so you will still hear packets from here.
>>> 
>>> Scott (VK7HSE), I found your beacons as well. Your frequency is about 900 Hz lower than the new frequency. Your centre freq is about 7046 kHz instead of 7046.9 kHz. Check the table below to see what your dial frequency should be.
>>> 
>>> Cheers,
>>> Gerard - VK2IO
>>> 
>>>> On 28/06/2016 7:14 PM, Tim Logan wrote:
>>>> Excellent ! Thanks Scott.
>>>> Cheers
>>>> 
>>>> On 28 Jun 2016, at 7:02 PM, Scott Evans <vk7hse at gmail.com> wrote:
>>>> 
>>>>> Yes I switched about a week ago...
>>>>> 
>>>>> 
>>>>>> On Tue, 28 Jun 2016, 18:53 Tim Logan <timlog77 at gmail.com> wrote:
>>>>>> Thanks Scott, 
>>>>>> I've been sending beacons on the new frequency but am only getting into VK2UMZ-2, have you guys in Tas changed frequencies ? I was always reliable into Tas on 40m from NSW.
>>>>>> No sweat, just making sure I have things setup correctly at my end.
>>>>>> Cheers
>>>>>> 
>>>>>> Sent from my iPad
>>>>>> 
>>>>>> On 23 Jun 2016, at 6:24 PM, Scott Evans <vk7hse at gmail.com> wrote:
>>>>>> 
>>>>>>> Hi Tim,
>>>>>>> 
>>>>>>> There was a bit of discussion off list,                       and yes 7.0486 is the dial frequency for 1600/1800Hz tones
>>>>>>> 
>>>>>>> Because I'm sending this from my phone, I can't seem to copy a frequency table that was in the off list discussion!  Gerard, could you please post that into this thread? (if & when you get a chance)
>>>>>>> 
>>>>>>> 
>>>>>>>>>> 
>>>>>>>>>> Band
>>>>>>>>>> Tone Frequencies
>>>>>>>>>> Dial Frequency (kHz)
>>>>>>>>>> LSB / USB
>>>>>>>>>> 
>>>>>>>>>> 40m
>>>>>>>>>> 1070/1270 (Group A)
>>>>>>>>>> 7048.07
>>>>>>>>>> 7045.73
>>>>>>>>>> 1100/1300 (Group B)
>>>>>>>>>> 7048.1
>>>>>>>>>> 7045.7
>>>>>>>>>> 1600/1800 (Group C)
>>>>>>>>>> 7048.6
>>>>>>>>>> 7045.2
>>>>>>>>>> 2025/2225 (Group D)
>>>>>>>>>> 7049.025
>>>>>>>>>> 7044.775
>>>>>>>>>> 2100/2300 (Group E)
>>>>>>>>>> 7049.1
>>>>>>>>>> 7044.7
>>>>>>>>>> 2110/2310 (Group F)
>>>>>>>>>> 7049.11
>>>>>>>>>> 7044.69
>>>>>>>>>> 2125/2325 (Group G)
>>>>>>>>>> 7049.125
>>>>>>>>>> 7044.675
>>>>>>>>>>  
>>> 
>>> _______________________________________________
>>> OZAPRS mailing list
>>> OZAPRS at aprs.net.au
>>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>> _______________________________________________
>> OZAPRS mailing list
>> OZAPRS at aprs.net.au
>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20160630/4bebdab6/attachment.html>