[OZAPRS] HF net stations

Scott Evans vk7hse at gmail.com
Thu Jun 30 19:02:10 AEST 2016


Will do.

On Thu, 30 Jun 2016, 18:42 Gerard Hill <gerardvk2io at gmail.com> wrote:

> Explains it! Propagation has gone now so not receiving either you or Tim.
> Look for your sigs in the morning.
>
> Cheers,
> Gerard - VK2IO
>
>
> On 30/06/2016 6:13 PM, Scott Evans wrote:
>
> Oops 😆
>
> Silly me was sitting on 7.048.110 LSB (dial)  when I should be up one
> kHz...  Now fixed!
>
> I was wondering why I hadn't heard anyone!
>
> On Thu, 30 Jun 2016, 17:46 Gerard Hill <gerardvk2io at gmail.com> wrote:
>
>> Hi Tim (VK2HLT),
>> I've been receiving your beacons for a few days but they have not reached
>> the APRS-IS. This turned out to be a configuration issue (and possible bug)
>> with BPQ32. Gating is now working, but my APRS beacons are not going out so
>> more changes are needed. Other beacons are being sent so you will still
>> hear packets from here.
>>
>> Scott (VK7HSE), I found your beacons as well. Your frequency is about 900
>> Hz lower than the new frequency. Your centre freq is about 7046 kHz instead
>> of 7046.9 kHz. Check the table below to see what your dial frequency should
>> be.
>>
>> Cheers,
>> Gerard - VK2IO
>>
>> On 28/06/2016 7:14 PM, Tim Logan wrote:
>>
>> Excellent ! Thanks Scott.
>> Cheers
>>
>> On 28 Jun 2016, at 7:02 PM, Scott Evans <vk7hse at gmail.com> wrote:
>>
>> Yes I switched about a week ago...
>>
>> On Tue, 28 Jun 2016, 18:53 Tim Logan <timlog77 at gmail.com> wrote:
>>
>>> Thanks Scott,
>>> I've been sending beacons on the new frequency but am only getting into
>>> VK2UMZ-2, have you guys in Tas changed frequencies ? I was always reliable
>>> into Tas on 40m from NSW.
>>> No sweat, just making sure I have things setup correctly at my end.
>>> Cheers
>>>
>>> Sent from my iPad
>>>
>>> On 23 Jun 2016, at 6:24 PM, Scott Evans <vk7hse at gmail.com> wrote:
>>>
>>> Hi Tim,
>>>
>>> There was a bit of discussion off list, and yes 7.0486 is the dial
>>> frequency for 1600/1800Hz tones
>>>
>>> Because I'm sending this from my phone, I can't seem to copy a frequency
>>> table that was in the off list discussion!  Gerard, could you please post
>>> that into this thread? (if & when you get a chance)
>>>
>>>
>>>>> *Band*
>>>>> *Tone Frequencies*
>>>>>
>>>>> Dial Frequency (kHz)
>>>>> LSB / USB
>>>>> 40m
>>>>> 1070/1270 (Group A)
>>>>> *7048.07*
>>>>> 7045.73
>>>>> 1100/1300 (Group B)
>>>>> *7048.1*
>>>>> 7045.7
>>>>> 1600/1800 (Group C)
>>>>> *7048.6*
>>>>> 7045.2
>>>>> 2025/2225 (Group D)
>>>>> *7049.025*
>>>>> 7044.775
>>>>> 2100/2300 (Group E)
>>>>> *7049.1*
>>>>> 7044.7
>>>>> 2110/2310 (Group F)
>>>>> *7049.11*
>>>>> 7044.69
>>>>> 2125/2325 (Group G)
>>>>> *7049.125*
>>>>> 7044.675
>>>>>
>>>>>
>>>>
>> _______________________________________________
>> OZAPRS mailing list
>> OZAPRS at aprs.net.au
>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20160630/248d4f7d/attachment.html>


More information about the OZAPRS mailing list