[OZAPRS] ISS set up
Robert
rbaker at bigpond.com
Sun Jun 8 07:31:17 EST 2014
Also forgot.
The power of the ic-u2A is only 1wat on high, this may be the problem.
Robert
From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On Behalf Of Jack Chomley
Sent: Saturday, 7 June 2014 10:24 PM
To: Australian APRS Users
Subject: Re: [OZAPRS] ISS set up
I manage it with a VX-8DR @ 5 watts with a Diamond RH-770 telescopic whip antenna.
73,
Jack VK4JRC
Club. www.cqara.org.au
Member WIA SARL ARRL
GQRP #14392
QRPARCI #15068
VKQRP. #833
EARC KH6 (Assoc Member)
On 7 Jun 2014, at 10:16 pm, Andrew Rich <vk4tec at tech-software.net> wrote:
What is your ISS digi path and power output ?
ARISS.
I use 25 watts
Andrew vk4tec
Sent from my iPhone
On 7 Jun 2014, at 7:59 pm, "Robert" <rbaker at bigpond.com> wrote:
Hi All.
Setting up a ISS system using a Opentracker +, and a Icom IC-u2A.
But have followed all settings that I could find, but still no good.
The deviation on the radio is around 3.5-4, so not over deviating the radio.
Any ideas
Robert
_______________________________________________
OZAPRS mailing list
OZAPRS at aprs.net.au
http://lists.aprs.net.au/mailman/listinfo/ozaprs
_______________________________________________
OZAPRS mailing list
OZAPRS at aprs.net.au
http://lists.aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20140608/d666caae/attachment-0001.html>
More information about the OZAPRS
mailing list