[OZAPRS] OZAPRS Digest, Vol 60, Issue 11

Andrew andrew at 4852q.info
Fri Jul 25 12:54:45 EST 2014


Thanks Justin, I have mapped the two TNCPi's on I2C and last night downloaded the APRS manual which is much more detailed than the wiki. It is very easy to configure a two radio solution with a single instance of APRX. Hopefully I'll test this weekend.

Cheers
VK4VAG (Andrew)

> On 25 Jul 2014, at 12:00, ozaprs-request at aprs.net.au wrote:
> 
> Send OZAPRS mailing list submissions to
>    ozaprs at aprs.net.au
> 
> To subscribe or unsubscribe via the World Wide Web, visit
>    http://lists.aprs.net.au/mailman/listinfo/ozaprs
> or, via email, send a message with subject or body 'help' to
>    ozaprs-request at aprs.net.au
> 
> You can reach the person managing the list at
>    ozaprs-owner at aprs.net.au
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of OZAPRS digest..."
> 
> 
> Today's Topics:
> 
>   1. Re: Two instances of APRX on linux? (Justin Albury)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Thu, 24 Jul 2014 08:58:55 +0000
> From: Justin Albury <justin at jacomms.com>
> To: Australian APRS Users <ozaprs at aprs.net.au>
> Subject: Re: [OZAPRS] Two instances of APRX on linux?
> Message-ID:
>    <1875704CA16F394E9BD4F952C7776AD3FFD5D66E at SERVER.jacomms.local>
> Content-Type: text/plain; charset="us-ascii"
> 
> Sorry ...I2C not SPI ....Its been a while since I set mine up
> 
> Link Below
> 
> http://tnc-x.com/TNCPi.htm
> 
> 
> Justin Albury
> J Albury Communications
> justin at jacomms.com
> 0417246791
> 
> From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On Behalf Of Justin Albury
> Sent: Thursday, 24 July 2014 9:57 AM
> To: Andrew; Australian APRS Users
> Subject: Re: [OZAPRS] Two instances of APRX on linux?
> 
> Dont forget of you are running 2 TNC-Pi's to config it for SPI comms ..... RPi handles it just fine....
> 
> Justin Albury
> J Albury Communications
> justin at jacomms.com<mailto:justin at jacomms.com>
> 0417246791
> 
> From: ozaprs-bounces at aprs.net.au<mailto:ozaprs-bounces at aprs.net.au> [mailto:ozaprs-bounces at aprs.net.au] On Behalf Of Andrew
> Sent: Wednesday, 23 July 2014 6:56 PM
> To: ozaprs at aprs.net.au<mailto:ozaprs at aprs.net.au>
> Subject: [OZAPRS] Two instances of APRX on linux?
> 
> Last weekend I put up the mast for a new digi, iGate & AIS Rx for Mission Beach (far north Queensland) - 95M ASL covering Mourilyan Harbour to Cardwell.   I have two TNC-Pi's running on my RPi and spare antenna + Rx for 145.800MHz downlink.  It's a solar site and would love to have it all running on one box, has has anyone been successful running two instances of APRX on linux?
> 
> VK4VAG (Andrew)
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20140724/840ac213/attachment-0001.html>
> 
> ------------------------------
> 
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> 
> 
> End of OZAPRS Digest, Vol 60, Issue 11
> **************************************


More information about the OZAPRS mailing list