[OZAPRS] GPS to Kenwood T710
Damien Gardner Jnr
vk2tdg at gmail.com
Fri Aug 31 19:53:50 EST 2012
Sectio 4.2.1 on Page 15 of the User guide
(http://www.kenwood.com/i/products/info/amateur/pdf/TM-D710AE_IDM_R1.pdf) has
the pinout :)
TXD goes to the Red wire of the GPS cable supplied with the D710. (Or
Ring of the 2.5mm plug, if you're making your own). Ground of course
goes to the ground terminal of the connector.
Cheers,
DG
On 31/08/2012 7:34 PM, Liz wrote:
> Would someone be able to assist with advice on connecting a Garmin
> serial GPS mouse to Kenwood T710?
>
> In particular any advice on the pinouts of the 2.5mm jack are?
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
--
Damien Gardner Jnr
VK2TDG. Dip EE. GradIEAust
vk2tdg at gmail.com - http://www.rendrag.net/
--
We rode on the winds of the rising storm,
We ran to the sounds of thunder.
We danced among the lightning bolts,
and tore the world asunder
More information about the OZAPRS
mailing list