[OZAPRS] What setting Arriss ?

[Andrew Rich]

RS0ISS-4  DIGI
RS0ISS-11 BBS

ALIAS WIDE,ARISS

UNPROTO CQ VIA RS0ISS-4 (direct)
UNPROTO CQ VIA ARISS (one hop)
UNPROTO CQ VIA ARISS,SGATE (ISS then sgate)

You can connect to RS0ISS-11

I use a THD72A with a 5/8 antenna 5 watts

I have worked it on a HT but only just.

- Andrew VK4TEC -




----- Original Message ----- 
From: "Gary Stern" <vk2zbb at gmail.com>
To: "Australian APRS Users" <ozaprs at aprs.net.au>
Sent: Wednesday, March 30, 2011 3:05 PM
Subject: Re: [OZAPRS] What setting Arriss ?


> It was all caps and no spaces.
> 
> On 29/03/2011 1:38 PM, Ray Wells wrote:
>> On 29/03/11 12:08, Gary Stern wrote:
>>> I heard the Sat whilst driving yesterday thru Emerald.
>>>
>>> But I dont appear on aprs.fi.
>>>
>>> I have Set
>>>
>>> Ariss, Sgate, Wide2-1
>>>
>>> is that correct ?
>>> if so, I must have heard but not been heard.
>>>
>>> Gary
>>> (just leaving Surat)
>>> _______________________________________________
>>> OZAPRS mailing list
>>> OZAPRS at aprs.net.au
>>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>>
>>
>> Gary,
>>
>> The AX25 specification calls for upper case letters in a callsign.
>> Although I can't quickly find reference in the AX25 Specification
>> Manual, I expect that would also apply to an alias.
>>
>> Have you tried with upper case addressing?
>>
>> Or, it could be, as you've suggested, you heard but were not heard.
>>
>> I would have thought that ARISS would be enough to be digied by the ISS.
>> My satgate port in Xastir doesn't have an alias, it simply gates
>> anything it hears on 145.825 to the internet. I don't send anything back
>> to RF.
>>
>> Ray vk2tv
>> _______________________________________________
>> OZAPRS mailing list
>> OZAPRS at aprs.net.au
>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs