[OZAPRS] Something is wrong, this is a fixed location.

[Gordon Taylor]

Kim,
	Some OpenTrackers send out their voltage and temperature by default.

That is not the problem at the moment.

Regards,
Gordo VK4VP

-----Original Message-----
From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
Behalf Of Kim Hawtin
Sent: Wednesday, 9 March 2011 15:43
To: ozaprs at aprs.net.au
Subject: Re: [OZAPRS] Something is wrong, this is a fixed location.

On 09/03/11 08:49, Gordon Taylor wrote:
> I think you guys are getting caught up in the wrong area.

I wonder ...

> 2011-03-08 02:57:14 UTC:
>
VK4MR-9>APOTC1,VK4BNQ-1*,WIDE2-2,qAR,VK4UN-1:!2608.03S/15239.91E>207/008/A=0

I recently read an article on a blog about some one that was using a 
gel-cell battery, an opentracker and a jarcar Tx module, that was 
graphing the voltage drain and temperature for a portable ARPS node

> 00300 14.0V 23C_Bob Mobile
         ^^^^  ^^


I can't find the article now...

I wonder if this is the person thats doing that, not realizing its on 
the main ARPS frequency?

regards,

Kim VK5FNET
_______________________________________________
OZAPRS mailing list
OZAPRS at aprs.net.au
http://lists.aprs.net.au/mailman/listinfo/ozaprs