[OZAPRS] QRG drift HF APRS

VK4UN vk4un at bigpond.com
Thu Jun 30 09:51:06 EST 2011


What makes you think that VK6UZ-4 Info is correct??
In the list you sent out below shows that VK4VP-15 is in the list on the 29th June 2011 which is yesterday, and he hasn't TX on HF APRS since the 15 May 2011
Sounds like a storm in a teacup to me, in the latest list on the web on VK6UZ-4 shows me TX today, my radio isn't turned on

73's  David    VK4UN

  ----- Original Message ----- 
  From: Mike Zwingl oe3mzc 
  To: Australian APRS Users 
  Sent: Wednesday, June 29, 2011 9:37 PM
  Subject: [OZAPRS] QRG drift HF APRS


  see how all stations on 10Mhz are drifting offset in QRG:
  http://aprs.fi/?c=raw&call=vk6uz-4
  It is not the absolute but the relative value to each other that makes the problem in decoding hf-aprs sigs.
  (values after callsigns is given in Hz)

  2011-06-29 11:24:57 UTC: VK6UZ-4>APU25N,TCPIP*,qAC,T2AUST:=3211.17S/11604.17E&HF-IGATE 10147.6USB Perth
  2011-06-29 11:29:01 UTC: VK6UZ-4>APRS,TCPIP*,qAC,T2AUST:>dF (Hz): WIDE1 +100, VK2GKA-15 +50, VK7BW-15 +50, VK8ZAB-4 +25
  2011-06-29 11:29:02 UTC: VK6UZ-4>APRS,TCPIP*,qAC,T2AUST:>dF (Hz): VK4UN-4 +62, VK5ATN-15 +65, VK5LY-15 +43, VK4KWI-15 +75
  2011-06-29 11:29:02 UTC: VK6UZ-4>APRS,TCPIP*,qAC,T2AUST:>dF (Hz): VK2AJ-15 +50, KF7EU-6 +25, ZS6SS-3 +62, VK2TV-4 +143
  2011-06-29 11:29:02 UTC: VK6UZ-4>APRS,TCPIP*,qAC,T2AUST:>dF (Hz): VK3DHI-15 +68, VP8DEU +43, VK2DQC-15 +81, VK4DMI-4 +96
  2011-06-29 11:29:02 UTC: VK6UZ-4>APRS,TCPIP*,qAC,T2AUST:>dF (Hz): VK4HW-15 +46, VK4VP-15 +25, DL8RCB-3 +100, IW2GOB-10 +100
  2011-06-29 11:29:02 UTC: VK6UZ-4>APRS,TCPIP*,qAC,T2AUST:>dF (Hz): VK4KMR-15 +46, F5LDS-4 +112, VK2SX-15 +50, LA4FPA-15 +87
  2011-06-29 11:29:02 UTC: VK6UZ-4>APRS,TCPIP*,qAC,T2AUST:>dF (Hz): VK7DIK-4 +40, VK3MY-4 +65, VK3BZQ-9 +37, VK5LY-4 +43
  2011-06-29 11:29:02 UTC: VK6UZ-4>APRS,TCPIP*,qAC,T2AUST:>dF (Hz): VK4UN-15 +43, VK8LM +50, VK5LY-6 +50, VK3BDG-9 -18

    ----- Original Message ----- 
    From: Michael Wain 
    To: Australian APRS Users 
    Sent: Thursday, April 28, 2011 2:01 AM
    Subject: Re: [OZAPRS] HF APRS with an FT 857D and Kantronics KP3


    G'day Russ,


    Thanks for the reply, I've been meaning to set up a buy / sell page on the web site, just hav'nt had time, but any way I'll asks arould for you.


    P.S. I also have a web site at vk3hau.com but the info is a bit old now.


    Yours sincerely 


    Michael Wain - VK3HAU


    EGARC Inc. Publicity Officer. Ph: 613 - 51411650

    On 28/04/2011, at 0:06, "Russell" <ashdown at hunterlink.net.au> wrote:


            Hi Michael,

            Had a look at your club site.....pretty good.

            If you or the club has a KP3 spare I would like to buy it and put it in service as a digi in our area.

            Russ 

            VK2VK


            -------Original Message-------

            From: Michael Wain
            Date: 27/04/2011 23:32:57
            To: Australian APRS Users
            Subject: Re: [OZAPRS] HF APRS with an FT 857D and Kantronics KP3

            The only work out my KPC-3 gets nowa days is beaconing my weather station from the ui-view32 software, cost me nearly $300 back in the day of packet 16 years ago, and it got a lot of work, but now, just seats in the corner of the shack tx every 30 mins, I have always wanted to setup a Igate on hf ( 40mtrs ), oh well, one day maybe if the wife is not looking at the bank account I mite look at the KAM. 



            Yours sincerely


            Michael Wain - VK3HAU


            EGARC Inc. Publicity Officer.

            Ph : 613 - 51411650
            Email - vk3hau at vk3egc.org
            Web - http://www.vk3egc.org 

            <macbean tartan - sheld1.jpg>< a>



            ----- Original Message ----- 
            From: Russell 
            To: Australian APRS Users 
            Sent: Wednesday, April 27, 2011 9:46 PM
            Subject: Re: [OZAPRS] HF APRS with an FT 857D and Kantronics KP3


                  Hi Shaun,



                  I've been running a Kantronics KP3 ($80 on VKHAM) with a IC2820 at my shack for about three month now and it works a treat, VK2VK-5. (2M)

                  Software is Ui-View and running KISS on the KP3


                  I have just landed a Kantronics All mode "KAM" (runs HF and VHF) from UK for $120 AU.

                  Hoping to be on HF within the week if work allows. I also have a FT-857D that I hope to run my HF Igate on.


                  If I can be of any assistance give me a yell.


                  For your info. 

                  Regards

                  Russ  

                  VK2VK-5 Central Coast Igate




                  -------Original Message-------

                  From: Shaun
                  Date: 27/04/2011 09:30:32
                  To: Australian APRS Users
                  Subject: Re: [OZAPRS] HF APRS with an FT 857D and Kantronics KP3

                  OK, I set the TNC back to 2m 1200 settings and all working fine, so it would
                  appear the 200 vs 800hz was the issue. Silly that Kantronics didn't address
                  the issue rather than just telling you it won't work.

                  I set my symbol to a bike as I had never really worked out how to do that part
                  or the set up although for today I think I should change it to a boat with
                  this rain!

                  And for the info of the APRS.net.au people this link is broken in the
                  configurations page:  http://web.ew.usna.edu/~bruninga/aprs/symbolsX.txt

                  Once again, thanks for all your help.  Even though it didn't work I now have a
                  better understanding of this part of our hobby.

                  73

                  Shaun VK2XPP-9

                  On Wed, 27 Apr 2011 05:43:28 Shaun wrote:
                  > Thanks Terry,
                  >
                  > This explains a lot, and although not the outcome I was looking for, your
                  > help has saved me a lot of time.
                  >
                  > Anyone got a cheep 300 baud 200 hz modem going?
                  >
                  > Thanks to all that contributed.
                  >
                  > 73
                  >
                  > Shaun VK2XPP-9 for now.
                  >
                  _______________________________________________
                  OZAPRS mailing list
                  OZAPRS at aprs.net.au
                  http://lists.aprs.net.au/mailman/listinfo/ozaprs 



--------------------------------------------------------------------


            _______________________________________________
            OZAPRS mailing list
            OZAPRS at aprs.net.au
            http://lists.aprs.net.au/mailman/listinfo/ozaprs

           

      _______________________________________________
      OZAPRS mailing list
      OZAPRS at aprs.net.au
      http://lists.aprs.net.au/mailman/listinfo/ozaprs



----------------------------------------------------------------------------


    _______________________________________________
    OZAPRS mailing list
    OZAPRS at aprs.net.au
    http://lists.aprs.net.au/mailman/listinfo/ozaprs



------------------------------------------------------------------------------


  _______________________________________________
  OZAPRS mailing list
  OZAPRS at aprs.net.au
  http://lists.aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20110630/0a4ac44e/attachment-0001.htm>


More information about the OZAPRS mailing list