[OZAPRS] Seeking VK2JPL

[Andrew Rich]

Packet radio works well via voice repeaters 

No delay 


----- Original Message ----- 
From: "Andrew Rich" <vk4tec at tech-software.net>
To: "Australian APRS Users" <ozaprs at aprs.net.au>
Sent: Tuesday, January 18, 2011 12:57 PM
Subject: Re: [OZAPRS] Seeking VK2JPL


> After that , nail through the COAX
> 
> Did I say that ?
> 
> 
> ----- Original Message ----- 
> From: "Peter Mudie" <peter at mudiefamily.org>
> To: "Australian APRS Users" <ozaprs at aprs.net.au>
> Sent: Tuesday, January 18, 2011 12:51 PM
> Subject: Re: [OZAPRS] Seeking VK2JPL
> 
> 
>> Hi Richard,
>> 
>> If the e-mail doesn't get a bite, you will likely find Paul on the 
>> 147.325MHz + 600 kHz repeater the repeater lives at his QTH.
>> 
>> Thanks
>> Peter
>> 
>> At 08:07 AM 18/01/2011, Richard Murnane wrote:
>>>On 18/01/2011, at 6:01 AM, Shaun wrote:
>>>
>>>>I wondered what was going on.  Probably a simple dial knock. I know
>>>>my dial
>>>>lock only lock the dial and other buttons can still change the memory
>>>>position.
>>>>
>>>>I will give a call for him or anyone that knows him this morning.
>>>
>>>Thanks Shaun, I already sent him an email yesterday. I haven't checked
>>>the repeater yet today.
>>>
>>>I gather JPL-1 is normally on 144.875, so the MHz knob probably got
>>>jiggled.
>>>
>>>73 Richard VK2SKY
>>>_______________________________________________
>>>OZAPRS mailing list
>>>OZAPRS at aprs.net.au
>>>http://lists.aprs.net.au/mailman/listinfo/ozaprs
>> 
>> _______________________________________________
>> OZAPRS mailing list
>> OZAPRS at aprs.net.au
>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs