[OZAPRS] OT2 config

[Murray Parnell]

Hi Mark
I was using a yaesu vx8dr handheld with a 25 watt amp and 3db antenna...

Murray

On Fri, Apr 22, 2011 at 10:05 PM, Mark Austin <vk2jma at gmail.com> wrote:

> Murray,
> The test digi in Armidale is a fox delta unit, with all the associated
> problems. I'll let Ash know. With limited traffic through it, we don't
> miss it when it falls over!
> I've just had a look at your trip up and back and I'm surprised we
> didn't hear you via Mt Mombi, what sort of setup where you running?
> Regards,
> Mark
>
> On Fri, Apr 22, 2011 at 8:21 PM, Murray Parnell <vk2umz at gmail.com> wrote:
> > Hi Mark
> > I was in Armidale in early march and noticed that the digi there was not
> > digipeating at all... it was however sending its own beacon out
> regularly.
> >
> >
> > On Thu, Apr 21, 2011 at 7:25 AM, Mark Austin <vk2jma at gmail.com> wrote:
> >>
> >> Rick,
> >> The IGate here in Tamworth can hear the RTM-1, RCC-1 and both KOF-1&2
> >> digis direct, so no need for a further digi in the path. Adding one
> >> would just increase the traffic on the network for no benefit.
> >>
> >> We have a test digi up near Armidale that JMA-5 can't hear directly,
> >> it has wide2-1 in the path to get it back via RTM-1 or RCC-1.
> >>
> >> One thing that is missing in the config is the PHG data in the beacon
> >> text, Ray VK2TV has asked I add it (I haven't forgotten Ray!) I just
> >> need to find, an do some reading re the format required.
> >>
> >> CCed the list too, Hope you don't mind.
> >>
> >> Regards,
> >> Mark
> >>
> >> On Wed, Apr 20, 2011 at 11:10 PM, Rick Kowalewski <rick at vk6xlr.net>
> wrote:
> >> > Hi Mark,
> >> >
> >> > Thanks for the file!
> >> >
> >> > I notice that the Path is blank.  What is the reason behind that?  I
> was
> >> > under the assumption that is should contain a value, like wide2-1,
> etc.
> >> >
> >> > 73,
> >> > Rick
> >> >
> >> > ----------------------------------------------------------------
> >> >      Rick Kowalewski,  VK6XLR,  Geraldton, WA, Australia
> >> >     http://www.vk6xlr.net  rick at vk6xlr.net  vk6xlr at qsl.net
> >> >  "Out of order there is chaos, and out of chaos there is order"
> >> > ----------------------------------------------------------------
> >> >
> >> > On 20/04/2011 19:04, Mark Austin wrote:
> >> >
> >> > Rick,
> >> > Attached is the config file used on VK2RTM-1. VK2KOF-1&2 + VK2RCC-1
> >> > are configured the same except the digi alias for RCC is set to wide
> >> > not wide2. RCC will therefor respond to both wide1-x and wide2-x but
> >> > It's in a very low traffic area. RTM can hear from Newcastle to
> >> > Armidale and out to RCC so it gets a flogging, and has been up for ~2
> >> > years I think. Make sure you add your call to the remote access list,
> >> > then you can play with the config remotely if needed. Let us know if
> >> > we can assist further.
> >> > Regards,
> >> > Mark
> >> > VK2JMA.
> >> >
> >> _______________________________________________
> >> OZAPRS mailing list
> >> OZAPRS at aprs.net.au
> >> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> >
> >
> > _______________________________________________
> > OZAPRS mailing list
> > OZAPRS at aprs.net.au
> > http://lists.aprs.net.au/mailman/listinfo/ozaprs
> >
> >
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20110426/29a03e52/attachment-0001.htm>