[OZAPRS] HF APRS with an FT 857D and Kantronics KP3

Mark Austin vk2jma at gmail.com
Tue Apr 26 19:00:30 EST 2011


It's about 50% on the S/PO meter. If you have a look at the meter on
page 31 you can see the extended left edge at bar 16 just where the
label bubble points . It's harder to see on the radio.

On Tue, Apr 26, 2011 at 6:47 PM, Shaun <shaunbaby at optusnet.com.au> wrote:
> Looks like I will be inside the TNC to crank the output a bit as I also tried
> DIG gain at 100 and no where near 16 bars, of which I assume is about the S9
> mark on the display?
>
> Shaun
>
> On Tue, 26 Apr 2011 18:22:24 Mark Austin wrote:
>> Shaun,
>> I went around in circles until i adjusted the AGL to the 16 bars as
>> per RTTY set up. The 16th bar is longer on the left and about the mid
>> point up the scale to make it easier to see.
>>
>> Regards,
>> Mark
>>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>


More information about the OZAPRS mailing list