[OZAPRS] TT3plus / TT4 HF set up help needed.

[scameron]

Yes, i do see my position at my QTH, and i remember some years back i had to earth strap the Transceiver while using voice on HF did not think of this. how ever i would still like to confirm aginst another setting.
Regards,
Stuart

    
  ----- Original Message ----- 
  From: Ray Wells 
  To: ozaprs at aprs.net.au 
  Sent: Wednesday, September 29, 2010 7:33 PM
  Subject: Re: [OZAPRS] TT3plus / TT4 HF set up help needed.


  Stuart,

  When you say your setting work on the bench, do you mean that your position is transmitted and appears on aprs-is?

  If the answer to that is yes, the same settings should work from the vehicle and, if they don't I'd be looking at vehicle installation specific issues such as RF into the TT3/4.

  Could you be more specific as to what doesn't work?

  Ray vk2tv

  On 29/09/10 19:52, scameron wrote: 
    Hi group, i am still having issues setting up either TT3plus or TT4 on HF mobile Icom 706 Mk2g, i have checked my settings against our local APRS VK settings and can not see why it should not work, they both work here on the bench OK. Is it possible for somebody to email the settings either one would do.
    Regards,
    Stuart Vk5ade




_______________________________________________
OZAPRS mailing list
OZAPRS at aprs.net.au
http://lists.aprs.net.au/mailman/listinfo/ozaprs
  



------------------------------------------------------------------------------


  _______________________________________________
  OZAPRS mailing list
  OZAPRS at aprs.net.au
  http://lists.aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.aprs.net.au/pipermail/ozaprs/attachments/20100929/9c3da6ef/attachment.htm