[OZAPRS] Port to Port Cycle Ride.

[Richard Hoskin]

Hi Ron,

I talked to Rob VK3ECH about enabling his digi for the weekend.

Rob's currently sailing his boat in the Gippsland lakes but may be back home
on Sunday. If he's back he said he'd be happy to fire up the digi for you.

He also noted that the Echuca repeater is currently out of action.

Cheers
Richard
VK3JFK


> -----Original Message-----
> From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
> Behalf Of Ron Perry
> Sent: Friday, 5 November 2010 10:35 PM
> To: ozaprs at aprs.net.au
> Subject: [OZAPRS] Port to Port Cycle Ride.
> 
> Hi All,
> We are using a few trackers and a couple of portable digis for the above
> event. Around 400 cyclists will be taking part.
> 
> The Director (Direct-2) has a need to know where the Lead and Sweep
> vehicles are. A movable (mobile) digipeater Relay-2 is in use to try to
> relay the Lead/Sweep vehicles posits back to the Director.  They try to
> maintain 30km between the Lead and Sweep vehicles.
> 
> Also on the ride are 2 Motorcycle marshals,  myself VK3ECV-7 and Marlene
> VK3JAW-7.
> 
> Mildura to Swan Hill via Hattah on Saturday, Swan Hill to Echuca on
> Sunday.  Both days have a 7am start.
> 
> A big thanks to Peter VK3JUG for preparing the hardware for this event.
> 
> It would be good if the VK3ECH digipeater was on air Sunday too? ;-)
> 
> Enjoy
> Ron
> vk3ecv
> 
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs