[OZAPRS] HF aprs

[Gerard Hill]

Hi Mick,

Those packets look OK though I can't vouch for the compressed part of 
the message. You're not too far away from my IGate so should be able to 
get in direct on 7036.0 kHz via ground wave using the TT4. Since your 
message about a month ago I have driven through your suburb and heard 
beacons from VK2IO-4 at reasonable strength. You should be able to hear 
these too (and decode them at home). We could organise a test if you like.

Cheers ... Gerard, VK2IO

On 24/05/2010 12:49 PM, Mick wrote:
> Hi to the list,
>
> My HF setup (FT857/ TT4) seems to have stopped getting in on aprs. I
> have decoded the transmission form the 4WD
> on my home stn using AGWPro and AGW monitor. Could someone advise if the
> packets I'm sending are OK?
>
>
> 1:Fm VK2CMP-15 To SST7Y0 Via GATE,WIDE2-1 <UI pid=F0 Len=15 >[11:28:32]
> `O^l!o>/"4e}HF
>
> 1:Fm VK2CMP-15 To SST7X9 Via GATE,WIDE2-1 <UI pid=F0 Len=13 >[11:38:32]
> `O^l W>/"51}
>
> 1:Fm VK2CMP-15 To SST7X9 Via GATE,WIDE2-1 <UI pid=F0 Len=15 >[11:48:32]
> `O^l W>/"51}HF
>
> 1:Fm VK2CMP-15 To SST7Y0 Via GATE,WIDE2-1 <UI pid=F0 Len=13 >[11:59:54]
> `O^l+9>/"4m}
>
> 1:Fm VK2CMP-15 To SST7Y0 Via GATE,WIDE2-1 <UI pid=F0 Len=15 >[12:09:53]
> `O^l!R>/"4j}HF
>
> 1:Fm VK2CMP-15 To SST7Y0 Via GATE,WIDE2-1 <UI pid=F0 Len=13 >[12:19:53]
> `O^l!R>/"4j}
>
> 1:Fm VK2CMP-15 To SST7Y0 Via GATE,WIDE2-1 <UI pid=F0 Len=15 >[12:29:54]
> `O^l!R>/"4j}HF
>
> 1:Fm VK2CMP-15 To SST7Y0 Via GATE,WIDE2-1 <UI pid=F0 Len=13 >[12:39:53]
> `O^l!R>/"4j}
>
> Thanks
> Mick
> VK2CMP