[OZAPRS] javAPRSSrvr UDP Port 1315
Geoff
geoff-lists at gatwards.org
Tue Feb 16 18:53:09 EST 2010
Correct - 1315 UDP was used by APRSd to allow INPUT to the APRS-IS by client
scripts.
This is supported by javAPRSSrvr as well, but ONLY from the localhost
(127.0.0.1), whilst APRSd allowed incoming UDP from anyone on the internet
(bad security practice)
Anyone writing scripts that inject data into the APRS-IS should use TCP
connections to the standard 14580 port.
Geoff VK2XJG
-----Original Message-----
From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
Behalf Of Jim Tittsler
Sent: Monday, February 15, 2010 8:56 AM
To: Australian APRS Users
Subject: Re: [OZAPRS] javAPRSSrvr UDP Port 1315
On 2010-02-15 10:39, Jim Tittsler wrote:
> On 2010-02-14 22:32, Steve Page wrote:
>> What does anyone know about javAPRSSrvr UDP Client Port number 1315?
>> What is this port used for?
Sorry, I clearly misunderstood the direction.
I don't know what that port is used for... but I'd *guess* it is for
scripting since that was the old APRSd scripting port.
Sorry for the noise.
--
Jim Tittsler ZL2IA/AI8A/7J1AJH Gisborne GPG: 0x01159DB6
http://OnNZ.net/ham/ QRP/Satellites/APRS
AMSAT-NA/AMSAT-ZL/NZART
_______________________________________________
OZAPRS mailing list
OZAPRS at aprs.net.au
http://lists.aprs.net.au/mailman/listinfo/ozaprs
More information about the OZAPRS
mailing list