[OZAPRS] Missed Somthing?

[Michael]

Yes . Here is the settings for interface and defaults.

File/Configure/Defaults
	Transmit Station Option		Fixed Station
	Igate Options			RF->Inet and Inet->RF

Interface/Interface Control - Configure TNC
	IGate Options			Allow RF->Inet and Inet->RF Traffic


nws-stations.txt is in ~/.xastir/data
it is the same file as used in previous install so should be no issue there

Thanks again but still no joy


-----Original Message-----
From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
Behalf Of Ray Wells
Sent: Tuesday, 2 February 2010 3:16 PM
To: Australian APRS Users
Subject: Re: [OZAPRS] Missed Somthing?

Michael,

Did you tick Allow RF->Inet and Inet->RF in

File/Configure/Defaults

Don't forget to Save Config Now to make it permanent.

Ray vk2tv

Michael wrote:
> I am almost complete in the rebuild of the iGate but I must have missed
> something. There is no net traffic out to RF. Beacons are going out fine.
RF
> to Net also working.
>
> eeeBuntu - Xastir
> Fixed Station
> Pass-Code - entered
> Nws-stations.txt installed
> Allow RF-> iNet and iNet-> RF Checked on all Interfaces
> Path1: APX195 via WIDE2-2
> rotate.aprs.net.au:14580 With filter set to m/700
>
> Stations are showing on the map so I figure that all is well on the net
side
> of the setup. Both -1 and -9 are showing live on the net.
>
> Any advise please.
>
> Michael
> VK5MW
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
>   

_______________________________________________
OZAPRS mailing list
OZAPRS at aprs.net.au
http://lists.aprs.net.au/mailman/listinfo/ozaprs