[OZAPRS] Alinco 635 TNC

[Steve Sharp]

Only just got it doing something - whether it can be classed as fixed or not
is another question!

Not sure what I fixed, but it seemed to beacon happily and make it to the
net after I changed UNPROTO APRS VIA WIDE1-1,WIDE2-2 to UNPROTO GPSLJ VIA
WIDE1-1,WIDE2-1* .*

So, what made the difference GPSLJ or the wide2-1 I wonder?

Now looking for my GPS so I can get the important (to me) part working -
suffering brain fade as I cam off night shift this AM and have another
tonight, so likely to put my head down in the next hour or 2 and call it
quits for tinkering today.

Steve VK2POO



On 6 August 2010 11:57, Damien Gardner Jnr <rendrag at rendrag.net> wrote:

> Hrrm, I dont' know what aprs.fi is doing, but you're hitting
> second.aprs.net.au ok..:
>
> aprslog=# select id, TIMESTAMP WITH Time Zone 'epoch' + (lastheard/1000) *
> INTERVAL '1 second', laststatus  from identity where callsign='VK2POO' and
> ssid=9;     id   |        ?column?        | laststatus
> -------+------------------------+-------------
>  46627 | 2010-08-06 11:32:30+10 | who borkit?
>
> aprslog=# select TIMESTAMP WITH Time Zone 'epoch' + (timestamp/1000) *
> INTERVAL '1 second', sourcepath, payload  from packet where sourceid=46627
> order by timestamp desc limit 6;
>
> 2010-08-06 11:33:53+10 | VK4RGC-3,WIDE2*,qAR,VK4HW-4   | who borkit?
> 2010-08-06 11:32:30+10 | VK4RGC-3*,WIDE2-1,qAS,VK4OG-1 | who borkit?
> 2010-08-06 11:30:43+10 | VK4RGC-3,WIDE2*,qAR,VK4HW-4   | who borkit?
> 2009-10-17 11:22:50+11 | VK4RGC-3*,WIDE2-2,qAR,VK4HW-4 |
> 170023z\\lFru9sYkt!G/A=000140 12.5V 37C HDOP01.0 SATS09
> 2009-10-17 11:02:49+11 | VK4RGC-3*,WIDE2-2,qAR,VK4HW-4 |
> 170003z\\lFru9sYkn!G/A=000133 12.4V 37C HDOP00.9 SATS11
> 2009-10-17 10:42:48+11 | VK4RGC-3*,WIDE2-2,qAR,VK4HW-4 |
> 162343z\\lFru9sVkr!G/A=000165 12.4V 37C HDOP01.2 SATS10
>
> Ahh, you've only just fixed it ;)
>
> So what was it? :)
>
> Cheers,
>
> DG
>
> Steve Sharp wrote:
>
>   Yes Jim, I know that is the format, I was just using as shorthand
> example of the generic settings that I am using in an attempt to get it
> working and I didn't have access to a list of the DISP results from the 635
> at the time of the post.
>
> The point is that even when I put the correct lat/long values and format I
> get a digi back from VK4RGC-3 but nothing gets out to aprs.fi.
>
> Steve
>
> On 6 August 2010 09:33, Jim Tittsler <ZL2IA at onnz.net> wrote:
>
>> On 2010-08-05 17:13, Steve Sharp wrote:
>> > Mycall vk2poo-9
>> > bt !28.whateverS/153.whateverE- >it's broken
>>
>> The location should be of the form DDMM.mmS/DDDMM.mmE
>> Degrees and minutes (to two decimal places).
>>
>> _______________________________________________
>> OZAPRS mailing list
>> OZAPRS at aprs.net.au
>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>
>
> ------------------------------
>
> _______________________________________________
> OZAPRS mailing listOZAPRS at aprs.net.auhttp://lists.aprs.net.au/mailman/listinfo/ozaprs
>
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.aprs.net.au/pipermail/ozaprs/attachments/20100806/8c99f841/attachment.htm