[OZAPRS] HF operation on 40m

[Michael Wain]

Hello Mick,
I Have been following the TT4 forums and Byon says the TT4 is ..... well 
here's what he say about HF and the TT4..


" quote "
No, not yet.  I don't have any experience with operating 300 baud, and 
always thought that you needed the ability to "tune" your HF radio to the 
correct frequency, plus added filters to keep the noise out.  But I am just 
guessing.  I could try to boost it up on the to do it.  I'd like to have an 
HF packet expert to work with off-list.



thanks,
Byon


On Thu, Apr 15, 2010 at 2:28 PM, Robin Williams <phonetech at xtra.co.nz> 
wrote:



  Hi Byon and all,
  Will the tt4 decode 300 baud yet.
  Cheers,
  Robin ZL3REW


__._,_.___
" unquote "


Yours sincerely Michael Wain - VK3HAU

EGARC Inc. Publicity Officer.



----- Original Message ----- 
From: "Mick" <vk2cmp at me.com>
To: <ozaprs at aprs.net.au>
Sent: Thursday, April 22, 2010 9:31 PM
Subject: [OZAPRS] HF operation on 40m


>I will give it a go thanks. I was on 7.036 because I was aiming for a group 
>C frequency of 1600/1800Hz with the Tiny Track4?. I did check a waterfall 
>on an FT2000 and it appears the FSK tones being transmitted are on 
>1600/1800Hz with the dial set to 7.036 and LSB on the 2000.   cheers Mick 
>VK2CMP
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs