[OZAPRS] TM-D700A won't turn on

[Darryl Smith]

Greg

I would imagine contamination causing a resistance which puts signals where
they are not expected. Often on the boards there will be a sticky part of
the board where the foam or tape has moved. Contamination can stick to this
causing issues.

Darryl

---------
Darryl Smith, VK2TDS POBox 169 Ingleburn NSW 2565 Australia 
Mobile Number 0412 929 634 [+61 4 12 929 634 Int] - 02 9618 6459 
www.radio-active.net.au/blog/ - www.radio-active.net.au/web/tracking/


-----Original Message-----
From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
Behalf Of Greg Hammond
Sent: Tuesday, 6 April 2010 7:21 PM
To: Australian APRS Users
Subject: Re: [OZAPRS] TM-D700A won't turn on

Darryl

Do you know WHY the foam pads cause lock up? 

Greg

_______________________________________________
OZAPRS mailing list
OZAPRS at aprs.net.au
http://lists.aprs.net.au/mailman/listinfo/ozaprs