[OZAPRS] TT3 and a fm900 radio
maurie at remoteareacomms.com.au
Thu Jun 18 10:51:26 EST 2009
This is my set up.
Overview: I use a RT85, tt3 and a 12v gps engine. The tt3 and engine get
12v switched from the radio.
The 12v from the radio goes to pin 7 on the db9f on the tt3. Pin 4 on
the db9m (GPS end) takes 12v to the engine. Jumper 7 in the tt3 is
bridged to give the path through the tt3.
If you search through the WICEN Vic pages - data section - you will
find various pin out options for the FM92.
David McAulay wrote:
> Hi All
> Wonder if someone maybe able to help please.
> A couple of us here in VK3 have ordered the tt3 from the usa, and in prepartion are trying to make up a cable to suit a fm900 radio using the 8 pin din on the back of the radio. We propose to use the middle pin which is not connected at present to supply 12v to the tt3. The gps we propose to use is a 12v unit
> Looking at the tt3 web pages and cicuits between us we are still confused on what pins of the tt3 db9 we use
> and to what pins of the fm900
> Im sure someone has done it
> Could I ask you share this please with me
> Thank you
> All replies appreciated
> 73 David VK3EW
> Looking for a place to rent, share or buy this winter? Find your next place with Ninemsn property
> Ozaprs mailing list
> Ozaprs at aprs.net.au
Ozaprs mailing list
Ozaprs at aprs.net.au
More information about the Ozaprs