[OZAPRS] Re: Re: Your signal....

[Ray Wells]

Tony,

I've been seeing your frames on 20m for the last 3 days, quite a lot of 
them. I'm also resolving Philip since he's eliminated his frequency offset.

Ray vk2tv

Tony Hunt wrote:
> Hey Guys ,  Jack and David
>
> Just noticed a couple of wrong things going on .. I think your on 40m.. I am
> still on 20m and have nothing to report as recieved here except ZL2TZE-4 at
> times over the last 3 days. So 20m seems pretty dead to me.
>
> Now Jack your frames are address in the TO field as GATE .. This is wrong.
> You should be addressing per the APRS spec to something like APxxxx acording
> to your software or TNC which Ive no idea what it might be. Perhaps this is
> being generated by the SCS TNC .. The path should be Via GATE,WIDE2-1 on HF.
> With the TO field set like that many software packages will ignore it . If
> you dont know what to set it to then try APRS in the TO field. Packages like
> UiView and xastir set these fields themselves by default.
>
> David,  Your not quite there either. Your Path should be Via GATE,WIDE2-1
> not just via WIDE2 .. Thats a general rule on HF
>
> Tony VK5AH
>
>   
>> fm VK4JRC to GATE via WIDE2-1 ctl UI^ pid F0 - 01.04.09 20:10:36
>>     
>>> dF (Hz): VK4MDX -6, WIDE2 -9
>>>       
>> fm VK4JRC to GATE via WIDE2* ctl UI^ pid F0 - 01.04.09 20:10:42
>>     
>>> dF (Hz): VK4MDX -6, WIDE2 -9
>>>       
>> fm VK4MDX to APMIXW via WIDE 2 ctl UI^ pid F0 - 01.04.09 20:11:07
>>  HF IGATE 40 METERS 7036 LSB
>> fm VK4MDX to APMIXW via WIDE 2 ctl UI^ pid F0 - 01.04.09 20:11:38
>>  HF IGATE 40 METERS 7036 LSB
>>
>> Some of my return freq offset beacons in there, too
>>
>>     
>
>
>
>
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs
>
>   

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs