[OZAPRS] usb-serial
Damien Gardner Jnr
rendrag at rendrag.net
Sun Nov 30 08:35:53 EST 2008
I've been known to have up to 10 of the things plugged into my
workshop laptop at times over the years, with gps's, accelerometers,
tnc's, router consoles, etc, all running together, and haven't had a
problem :) Only issue was making sure that the same devices always
went into the same ports on the hubs, if I unplugged anything for any
reason (otherwise it's install drivers yet again for a 'new device',
and mess up your com port numbering...)
Cheers,
Damien
Damien Gardner Jnr
VK2TDG. Dip EE. GradIEAust
rendrag at rendrag.net - http://www.rendrag.net/
--
We rode on the winds of the rising storm,
We ran to the sounds of thunder.
We danced among the lightning bolts,
and tore the world asunder
On 30/11/2008, at 7:44 AM, Ben Lindner wrote:
> Hi All,
>
> I have just got a usb-serial cable working under XP that has been
> sitting around for many years and has never worked under XP before
> so did some searching for drivers and found some and it now works
> 100%. I have tested it with a GPS, all good.
>
> /My question is, has anyone used such a cable ( USB-SERIAL ) with a
> TNC without any problems. /I would be interested to hear any
> thoughts or suggestions
>
> regards
> Ben Lindner
> VK5JFK
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
More information about the Ozaprs
mailing list