[OZAPRS] How to install XASTIR on an eeepc

[WILSON Jim]

If you want to stay out of the command line as much as possible, you can
use the first 6 steps of these instructions to install xastir (steps 1
to 6 only) note "etch main" is needed, not "main non-free contrib" in
step 4. 

I assume xastir will appear under the amateur radio section of the
packages.

Note, I haven't tried this and don't own an eee-pc, yet. Andrew et. al.
might be able to use this to clarify any differences for xastir. It's a
little more detailed and user friendly for those shy of the command
line.

Jim
VK4JYM


-----Original Message-----
From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
Behalf Of Andrew Rich
Sent: Saturday, 22 March 2008 7:22 AM
To: TAPR APRS Mailing List
Cc: Australian APRS Users
Subject: [OZAPRS] How to install XASTIR on an eeepc

I have prepared a guide on how to install XASTIR on an ASUS eeepc

www.tech-software.net

Under the APRS/Packet section 

"eeepc install notes"

Enjoy

Andrew VK4TEC
________________________________________________________________________________

This email (including all attachments) may contain personal information and is intended solely for the named addressee. It is confidential and may be subject to legal or other professional privilege and any confidentiality or privilege is not waived or lost because this email has been sent to you by mistake.  This email is also subject to copyright.  No part of it should be reproduced, adapted or communicated without the written consent of the copyright owner. Any personal Information in this email must be handled in accordance with the Privacy Act 1988 (Cth).  If you have received it in error, please let Stanwell Corporation Limited know by reply email, delete it from your system and destroy any copies.  Stanwell is not responsible for any changes made to a document other than those made by Stanwell.  Stanwell accepts no liability for any damage caused by this email or its attachments due to viruses, interference, interception, corruption or unauthorised access.   If  you have any doubts about the authenticity of an email purportedly sent by us, please contact us immediately.  If this is a commercial electronic message within the meaning of the Spam Act 2003 (Cth), you may indicate that you do not wish to receive any further commercial electronic messages from Stanwell by emailing mailto:privacy at stanwell.com.
________________________________________________________________________________
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs