[OZAPRS] Bad Signal on 30m

[Ray Wells]

Jack Chomley wrote:

> At 12:13 PM 14/06/2008, you wrote:
>
>> Hi All,
>>
>> A few days ago I was monitoring the 30m aprs frequency (I don't 
>> normally have the volume turned up) and I heard a "crook" signal that 
>> won't decode. I've heard the signal on suvsequent days and as 
>> recently as this morning.
>>
>> The preamble (during TXD) sounds ok but then the signal sounds like 
>> there is a hash (for want of a better decription) mixed with the 
>> tones. RF feedback?
>>
>> It is not coming from the following stations ....
>> vk3my-4
>> vk7dik-4
>> vk4yro-4
>> vk4kmr-4
>>
>> The absence of any particular callsign in that list does not imply it 
>> is your station, but it might be. I'll add to the list of callsigns 
>> as I log them.
>>
>> Perhaps other 30m stations might like to have a listen.
>>
>> I'm sure the station responsible would like to know, because the 
>> beacons are currently a waste of time.
>>
>> Ray vk2tv
>
>
>
> I have been hearing it up in VK4 as well.....
>
> Jack VK4JRC-15
>
>
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs
>
I logged vk4un-15 (up Halls Creek way in vk6) here earlier so 
presumeably it's not him.

Ray vk2tv
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs