[OZAPRS] Vista

[VK4UN]

What I am trying to do is run UIVIEW and the tnc as a digipeter which 
requires the tnc to run in kiss mode


----- Original Message ----- 
From: "Ray Wells" <vk2tv at exemail.com.au>
To: "Australian APRS Users" <ozaprs at aprs.net.au>
Sent: Sunday, August 03, 2008 5:23 PM
Subject: Re: [OZAPRS] Vista


> VK4UN wrote:
>
>>Has anyone had any success in running a TNC in KISS mode using Windows 
>>Vista, I have tried everything I can think of with no success, have 
>>downloaded a Vista version of Hyper Terminal but still no go
>>
>>
>>
>>VK4UN
>>_______________________________________________
>>Ozaprs mailing list
>>Ozaprs at aprs.net.au
>>http://aprs.net.au/mailman/listinfo/ozaprs
>>
>>
> Do you mean using Hyperterminal to put the TNC into KISS mode, or using 
> Hyperterminal to communicate with the TNC after it's in KISS mode. The 
> former should work, assuming Hyperterminal can access the serial port, the 
> latter wouldn't work because Hyperterminal can't speak KISS.
>
> Vista makes Linux look good, and it was already better than Windoze.
>
> Ray vk2tv
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs 

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs