[OZAPRS] ISS back on again

[Kiely ZL1KILO MIKE]

Andrew Rich wrote:
 > Where is everyone ?
 >
 > 145.825 simplex CQ VIA ARISS
 >



Callsigns seen here so far from the 12th have been



15:44:36R ZL2CIA-6>APRS,RS0ISS-4*,ARISS,SGATE,WIDE Port=1 <UI Len=64>:
=4116.77S/17445.47EyAt amsat.org. Sgate for 145.825 MHz {UIV.ZL2



00:02:36R VK4KMR-11>RRS4W8,RS0ISS-4*,WIDE2-2 Port=1 <UI Len=37>:
'L1/l 
-/]Mark from   DYSART via ISS


14:50:34R VK4HW>CQ,RS0ISS-4* Port=1 <UI Len=46>:
=2735.26S\15245.29ES73' Via Satellite {UISS51}

15:12:03R VK4VP-7>RVT1W5,RS0ISS-4*,SGATE,WIDE2-2 Port=1 <UI Len=11>:
'Q\sl 
K\]

23:11:54R VK4HW>CQ,RS0ISS-4* Port=1 <UI Len=46>:
=2735.26S\15245.29ES73' Via Satellite {UISS51}

23:12:52R VK4KMR-11>RRS4W8,RS0ISS-4*,SGATE,APRSAT,WIDE2-2 Port=1 <UI
Len=37>:'L1/l 
-/]Mark from   DYSART via ISS

20:16:06R VK4KHP-9>CHD4T6,RS0ISS-4* Port=1 <UI Len=15>:
'PCJ!6kj/]"4l}

11:09:27R ZL3GA-1>APND12,RS0ISS-4* Port=1 <UI Len=46>:
=4322.91SN17238.49E#DIGI_NED: Geoff's satgate

12:39:35R VK4TEC>APU25N,RS0ISS-4* Port=1 <UI Len=54>:
:EMAIL    :vk4tec at people.net.au Email test via ISS{97



Just a note if you want to been gated to RF from here you need to put
SGATE as the second hop in the path as I am not a APRSAT digipeater nor
a WIDE digipeater (however I will respond to WIDE1-1)



It's my understanding that one should put SGATE as second hop of the
path,I see different one's been use i.e APRSAT,WIDE2-2





Kiely
ZL1KM



_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs