[OZAPRS] PRM80

[Tim VK2HLT]

I use a PRM80 at home here with my KPC3, works a treat all the connections

are on the DB 15, too easy ! If you have any dramas drop us a line, I
didnt 
even have to adjust any levels, runs straight out of the box.
Tim VK2HLT
----- Original Message ----- 
From: "vk7arn" <vk7arn at bigpond.com>
To: "'VK / ZL APRS Users'" <ozaprs at aprs.net.au>
Sent: Friday, June 22, 2007 4:41 AM
Subject: Re: [OZAPRS] PRM80


> Ben
>
> Have a look at 
> http://tas.wicen.org.au/Resources/PRMs_mods_frames_essentials.htm
> for DB15 pinouts.
>
> Use PRM
> Pin 4 for Mic from TNC to PRM
> Pin 3 and/or 5 for GND
> Pin 8 for PTT
> Pin 10 for Rx audio from PRM to TNC
>
> Anybody have different ideas?
>
> Roger VK7ARN
>
> -----Original Message-----
> From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On 
> Behalf
> Of Ben Lindner
> Sent: Friday, 22 June 2007 17:32
> To: VK / ZL APRS Users
> Subject: [OZAPRS] PRM80
>
>
> Has any one connected a PRM8010 to a TNC? If so is there any querky
> things to watch out for and could you supply me with any pinouts that
> might be relevant.
>
> The PRM8010 has a 15pin plug on the back of it
>
> Ben Lindner
> VK5JFK
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs
>
>
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs 

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://second.aprs.net.au/pipermail/ozaprs/attachments/20070625/ffa3d907/attachment.htm