[OZAPRS] PRM80
vk7arn
vk7arn at bigpond.com
Fri Jun 22 18:41:40 EST 2007
Ben
Have a look at
http://tas.wicen.org.au/Resources/PRMs_mods_frames_essentials.htm
for DB15 pinouts.
Use PRM
Pin 4 for Mic from TNC to PRM
Pin 3 and/or 5 for GND
Pin 8 for PTT
Pin 10 for Rx audio from PRM to TNC
Anybody have different ideas?
Roger VK7ARN
-----Original Message-----
From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
Behalf
Of Ben Lindner
Sent: Friday, 22 June 2007 17:32
To: VK / ZL APRS Users
Subject: [OZAPRS] PRM80
Has any one connected a PRM8010 to a TNC? If so is there any querky
things to watch out for and could you supply me with any pinouts that
might be relevant.
The PRM8010 has a 15pin plug on the back of it
Ben Lindner
VK5JFK
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://second.aprs.net.au/pipermail/ozaprs/attachments/20070622/cf08b186/attachment.htm
More information about the Ozaprs
mailing list