[OZAPRS] Solar panel question
Marc Robinson
PCA.cc at bigpond.com
Tue Jan 2 21:00:14 EST 2007
A 4w panel is not going to overcharge a 7 Ah gel cell. I doubt you
will see the battery volts go above 13.8v even on a really long
period of sunlight with no other load on the battery. The simplest
protection/regulation you could use is to connect a 14v Zenner diode
across the battery so the voltage cannot go above this level. A 1
watt zenner should do as it is only skimming the cream if ever there
is any, which I doubt.
Cheers,
Regards, Marc
--------------------------------------
Marc Robinson VK2BUA http://www.pca.cc
Pactor Communications Australia PCA.cc
PO Box 869 Artarmon NSW 1570 Australia
Tel+61 2 8011 4928 SkypePhone: pca.cc
Mob+61 4 2525 4928 Fax+61 2 9412 1878
--------------------------------------
>On Tue, 2 Jan 2007, Mark T. Webster wrote:
>
>> No need - the internal resistance is quite high. That current will not
>> damage the battery.
>
>But the solar panel if left unconnected, on the other hand...
>
>And being a constant-current device you *will* need some sort of
shut-off,
>unless you want to cook the battery.
>
>-- Dave
>_______________________________________________
>Ozaprs mailing list
>Ozaprs at aprs.net.au
>http://aprs.net.au/mailman/listinfo/ozaprs
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://second.aprs.net.au/pipermail/ozaprs/attachments/20070102/0732173d/attachment.htm
More information about the Ozaprs
mailing list