[OZAPRS] Bynocs MicroTrack

[Darryl Smith]

It would be 8W on 145.175 MHz. And that is why he would need to make up
100
of them minimum

Darryl

-----Original Message-----
From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
Behalf Of vk7arn
Sent: Friday, 3 August 2007 9:38 AM
To: 'VK / ZL APRS Users'
Subject: Re: [OZAPRS] Bynocs MicroTrack

Are there plans for a 145.175MHz version?  Otherwise it appears to me that
only
the 200mW variable frequency version is suitable.
Roger VK7ARN

-----Original Message-----
From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
Behalf
Of Matt Howard
Sent: Friday, 3 August 2007 09:34
To: ozaprs at aprs.net.au
Subject: [OZAPRS] Bynocs MicroTrack


Hi - bionics have a new all in one tracker  the micro-trak - made in
partnership
with VHS.

Allen from VHS has asked what version of the system Australian users would
be
most likely to use. They have 2 basic output options - 300mW and 8W

This is so that he can arrange to get some here to the distributors,
without
incurring too much cost for freight/duty by sending systems which will not
get
sold.

Can I have some feedback so I can pass this back to him.

Personally I am interested in the 8W version as I get out in the regional
areas
a lot.

You can view the product descriptions at www.byonics.com
<http://www.byonics.com/> 

Cheers Matt VK3XIL

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs


_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs