[OZAPRS] HF APRS Freqs on other bands?

[Richard Hoskin]

Hi Jack,

APRS if operational on other bands has been tried and is in use in other
contries see http://www.aprs.net.au/hf_aprs_information.htm

Experimentation here has found that with its size and requirement for
daytime propagation 10Mhz is best suits Australia. The next best appears
to
be 7Mhz. Though you start to run into signal to noise problems on the
lower.
bands.

Cheers
Richard
VK3JFK


> -----Original Message-----
> From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
> Behalf Of Jack Chomley
> Sent: Sunday, 15 April 2007 6:44 AM
> To: ozaprs at aprs.net.au
> Subject: [OZAPRS] HF APRS Freqs on other bands?
> 
> Since there is currently only 1 global HF APRS freq. Why not have a HF
> APRS
> freq on each band? This would allow people to optimise their HF APRS
> mobile
> operations to suit coverage area to reach an IGATE, when propagation
> characteristics change and also lighten the load on the 1 global freq?
> Jack VK4JRC-15
> 
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs


_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://second.aprs.net.au/pipermail/ozaprs/attachments/20070415/ec15effa/attachment.htm