[OZAPRS] HF modulation techniques

[Mike Zwingl oe3mzc]

it is TNC2 compatible to "The Firmware" Nord/Link.
I run more than one connected to UIView32 via AGWPE.


----- Original Message ----- 
From: "Jack Chomley" <radio at dodo.com.au>
To: "VK / ZL APRS Users" <ozaprs at aprs.net.au>
Sent: Saturday, April 14, 2007 11:48 PM
Subject: Re: [OZAPRS] HF modulation techniques


> Be aware that the SCS DSP tracker has USB interface and does have
> limitations working with older Packet Software. It also has NO 
> PMS/mailbox.
> Also many of the older TNC2 type command parameters are not in the unit.
> The supplied TRCONFIG software is very good for setting up your APRS
> parameters.
> 73s Jack VK4JRC
>
>
> At 07:38 AM 4/15/2007 +1000, you wrote:
>
>>Cool !
>>Thanks for that.
>>
>>I am looking at the SCS TNC.
>>
>>I have linux , will play with PSK125
>
>
>
>
>
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs 

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://second.aprs.net.au/pipermail/ozaprs/attachments/20070415/4e701dec/attachment.htm