[OZAPRS] AGW Packet Engine Problems...

Richard Hoskin vk3jfk at amsat.org
Fri Apr 6 22:50:05 EST 2007

Gday Mark,

I have never had any luck with AGWpe on Win98, however others have.

A good guide to AGWpe can be found here
And http://www.g1grb.co.uk/agw.html

Good luck.


> -----Original Message-----
> From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
> Behalf Of Mark Jeffrey
> Sent: Friday, 6 April 2007 5:23 PM
> To: ozaprs at aprs.net.au
> Subject: [OZAPRS] AGW Packet Engine Problems...
> Hi All,
> Probably not the first person with this question but I am having
> heaps of problems getting the AGW Packet Engine to run with WIN98se
> and my BayCom modem. (AGW ver 2004.1108)
> Think I must have a setting wrong somewhere.
> Firstly I have unzipped  "drivers.zip" into the same DIR as AGWPE.EXE
> I can see that AGWBAY.VXD is in there. (The driver I assume)?
> I often get a message  "Baycom modem not installed!  Hook IRQ Failed! "
> Also could someone please let me know if the Baud setting in AGWPE
> be set to 9600 (the port speed) or 1200 (speed of baycom modem).
> Any assitance to get this running would be much appreciated.
> Thanks
> Mark
> VK3MJ.
> Geeelong.
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs

Ozaprs mailing list
Ozaprs at aprs.net.au
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://second.aprs.net.au/pipermail/ozaprs/attachments/20070406/f95269ae/attachment.htm 

More information about the Ozaprs mailing list