[OZAPRS] Serial Programming Linux
Andrew Rich
vk4tec at tech-software.net
Fri Aug 25 18:48:26 EST 2006
Hammish.
How do your run this ?
Do you need to compile it ?
Andy
-----------------------------------------
Andrew Rich
Amateur radio callsign VK4TEC
email: vk4tec at tech-software.net <mailto:vk4tec at tech-software.net>
web: http://www.tech-software.net
Brisbane AUSTRALIA
-----Original Message-----
From: Hamish Moffatt [mailto:hamish at cloud.net.au]
Sent: Friday, 25 August 2006 9:16 AM
To: ozaprs at aprs.net.au; TAPR List
Subject: Re: [OZAPRS] Serial Programming Linux
On Fri, Aug 25, 2006 at 07:42:01AM +1000, Andrew Rich wrote:
> Any good at either perl or C programming for serial port routines ?
>
> I need tx and rx.
It's not hard. Here's an example - it's a program I wrote which emulates
an FT-847's CAT interface.
You pretty much just read from /dev/ttyS0 (Sn). But there are some
special functions to set the baud rate etc.
Hamish
--
Hamish Moffatt VK3SB <hamish at debian.org> <hamish at cloud.net.au>
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://second.aprs.net.au/pipermail/ozaprs/attachments/20060825/6f6767ca/attachment.htm
More information about the Ozaprs
mailing list